COMPONENTS
ILLUSTRATION
*1 | REAR AXLE HUB AND BEARING ASSEMBLY | *2 | REAR AXLE SHAFT NUT |
*3 | REAR DISC | *4 | REAR DISC BRAKE CALIPER ASSEMBLY |
*5 | REAR SPEED SENSOR | *6 | REAR SUSPENSION ARM COVER |
*7 | REAR FLEXIBLE HOSE | *8 | REAR DISC BRAKE DUST COVER SUB-ASSEMBLY |
![]() | Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping" : N*m (kgf*cm, ft.*lbf) | ![]() | N*m (kgf*cm, ft.*lbf): Specified torque |
● | Non-reusable part | ![]() | Toyota Body Grease W |
![]() | Do not apply lubricants to the threaded parts | - | - |
ILLUSTRATION
*A | w/o AVS | *B | w/ AVS |
*1 | REAR AXLE CARRIER SUB-ASSEMBLY | *2 | REAR NO. 1 SUSPENSION ARM ASSEMBLY |
*3 | REAR TRAILING ARM ASSEMBLY | *4 | REAR UPPER CONTROL ARM ASSEMBLY |
*5 | REAR NO. 2 SUSPENSION ARM ASSEMBLY | *6 | REAR LOWER SHOCK ABSORBER BRACKET SUB-ASSEMBLY |
*7 | SPACER | *8 | NO. 2 PARKING BRAKE WIRE ASSEMBLY |
*9 | REAR DRIVE SHAFT ASSEMBLY | - | - |
![]() | N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
*A | for TMMC Made | - | - |
*1 | LOWER CONTROL ARM PIN | - | - |
● | Non-reusable part | - | - |
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Exhaust Manifold: Installation
INSTALLATION PROCEDURE 1. INSTALL STUD BOLT HINT: If a stud bolt is deformed or its threads are damaged, replace it. (a) Using an E8 "TORX" socket wrench, install the 2 stud bolts to the exhaust manifold (TWC: Front Catalyst). Torque: 19.5 N·m {199 kgf·cm, 14 ft·lbf} (b) Using ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Telephone And Gps Antenna (for Front Side): Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during telephone and GPS antenna assembly removal/installation are shown below. Necessary Procedures After Par ...