ON-VEHICLE INSPECTION
PROCEDURE
1. SECURE VEHICLE
(a) Fully apply the parking brake and chock a wheel.
CAUTION:
2. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY OPERATION
(a) Turn the engine switch on (IG).
(b) Depress the brake pedal and check that the engine starts when the shift lever is in N or P, but does not start in any other position.
(c) Check that the back-up lights come on when the shift lever is moved to R, but do not come on with the shift lever in any other position.
If the operation is not as specified, check the park/neutral position switch assembly.
Click here
Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual > Blind Spot Monitor Sensor: Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during blind spot monitor sensor removal/installation are shown below. Necessary Procedures After Parts Remove ...
Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual > Ignition Coil And Spark Plug: Installation
INSTALLATION PROCEDURE 1. INSTALL SPARK PLUG HINT: Perform "Inspection After Repair" after replacing a spark plug. Click here (a) Install the 6 spark plugs to the cylinder head sub-assembly and cylinder head LH. Torque: 18 N·m {184 kgf·cm, 13 ft·lbf} NOTICE: If a spark plug has been struck or ...