PARTS LOCATION
ILLUSTRATION
*1 | ECM | *2 | ENGINE ROOM RELAY BLOCK AND JUNCTION BLOCK ASSEMBLY - EFI-MAIN FUSE - ETCS FUSE - ST RELAY |
ILLUSTRATION
*1 | SHIFT SOLENOID VALVE SL1 | *2 | SHIFT SOLENOID VALVE SL2 |
*3 | SHIFT SOLENOID VALVE SL3 | *4 | SHIFT SOLENOID VALVE SL4 |
*5 | SHIFT SOLENOID VALVE SL5 | *6 | SHIFT SOLENOID VALVE S1 |
*7 | SHIFT SOLENOID VALVE S2 | *8 | SHIFT SOLENOID VALVE SLU |
*9 | SHIFT SOLENOID VALVE SLT | *10 | TRANSMISSION WIRE - ATF TEMPERATURE SENSOR |
ILLUSTRATION
*1 | PARK/NEUTRAL POSITION SWITCH ASSEMBLY | *2 | TRANSMISSION REVOLUTION SENSOR (NT) |
*3 | TRANSMISSION REVOLUTION SENSOR (NC) | *4 | TRANSMISSION REVOLUTION SENSOR (NC3) |
ILLUSTRATION
*1 | - NORMAL MODE SWITCH COMBINATION SWITCH ASSEMBLY - SPORT MODE SWITCH | *2 | - TRANSMISSION CONTROL SWITCH TRANSMISSION FLOOR SHIFT ASSEMBLY |
*3 | SHIFT PADDLE SWITCH LH (TRANSMISSION SHIFT SWITCH ASSEMBLY) | *4 | SHIFT PADDLE SWITCH RH (TRANSMISSION SHIFT SWITCH ASSEMBLY) |
*5 | SPIRAL CABLE SUB-ASSEMBLY | *6 | STOP LIGHT SWITCH ASSEMBLY |
*7 | NO. 1 SWITCH WIRE | *8 | COMBINATION METER ASSEMBLY |
*9 | DLC3 | - | - |
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Oil Pump: Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during engine unit removal/installation are shown below. Necessary Procedure After Parts Removed/Installed/Rep ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Front Door Belt Moulding: Installation
INSTALLATION CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
PROCEDURE 1. INSTALL FRONT DOOR BELT MOULDING ASSEMBLY Install in this Direction (a) Engage the 8 claws as shown in the illustration to install ...