General Maintenance
GENERAL MAINTENANCE
PROCEDURE
1. INSPECT STEERING LINKAGE AND GEAR HOUSING
(a) Check the steering wheel free play.
Click here
(b) Check the steering linkage for looseness or damage.
(1) Check that the tie rod ends do not have any play.
(2) Check that the dust seals and boots are not damaged.
(3) Check that the boot clamps are not loose.
(4) Check that the steering gear housing is not damaged.
2. INSPECT BALL JOINTS AND DUST COVERS
(a) Inspect the ball joints for excessive looseness.
(1) Jack up the front of the vehicle and place wooden blocks with a height of 180 to 200 mm (7.09 to 7.87 in.) under the front tires.
(2) Lower the vehicle until the front coil spring has about half its ordinary load. Place stands under the vehicle for safety.
(3) Check that the front wheels are pointing straight ahead. Use wheel chocks on all 4 wheels.
(4) Using a lever, pry up the end of the lower arm. Check the amount of play.
Maximum Ball Joint Vertical Play:
0 mm (0 in.)
If there is any play, replace the ball joint.
(b) Check the dust cover for damage.
3. INSPECT DRIVE SHAFT BOOTS
(a) Check the drive shaft boots for loose clamps, cracks, grease leaks, kinks or damage.
4. INSPECT AUTOMATIC TRANSAXLE
(a) Visually check the transaxle for fluid leaks. If fluid is leaking, find the cause and repair it.
5. INSPECT AUTOMATIC TRANSAXLE FLUID COOLER HOSE AND CONNECTIONS
(a) Check the automatic transaxle fluid oooler hoses (oil cooler hoses) for cracks, leakage, loose connections and deformation.
6. INSPECT TRANSFER (for AWD)
(a) Visually check the transfer for oil leaks. If oil is leaking, find the cause and repair it.
7. INSPECT REAR DIFFERENTIAL (for AWD)
(a) Visually check the rear differential for oil leaks. If oil is leaking, find the cause and repair it.
8. INSPECT FRONT AND REAR SUSPENSION
(a) Check the front and rear suspension.
for Front Suspension: Click here
for Rear Suspension: Click here
9. TIGHTEN PROPELLER SHAFT BOLT (for AWD)
(a) Tighten the propeller shaft bolts.
Click here
Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual > Transfer Assembly: Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during transfer assembly removal/installation are shown below. Necessary Procedure After Parts Removed/Installe ...
Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual > Combination Switch: Installation
INSTALLATION PROCEDURE 1. INSTALL COMBINATION SWITCH ASSEMBLY (a) Install the combination switch assembly to the console box ornament with the 3 screws. 2. INSTALL CONSOLE BOX ORNAMENT (a) Install the console box ornament to the shifting hole frame sub-assembly with the 4 screws. (b) Install the con ...