DESCRIPTION
If the forward recognition camera cannot verify the vehicle information sent from the ECM, the forward recognition camera stores DTC U030051.
DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | DTC Output from |
---|---|---|---|---|---|
U030051 | Internal Control Module Software Incompatibility Not Programmed | The vehicle information sent from the ECM cannot be verified by the forward recognition camera. | Pre-collision system | Does not come on | Forward recognition camera |
PROCEDURE
1. | GO TO PRE-COLLISION SYSTEM |
HINT:
If DTC U030051 is output by the dynamic radar cruise control system, perform troubleshooting for the pre-collision system.
Click here
NEXT | END |
Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual > Smart Access System With Push-button Start (for Start Function): Power Source Mode does not Change to ON (IG and ACC)
DESCRIPTION If any of the following operations are performed, the certification ECU (smart key ECU assembly) receives a signal, and changes the power source mode.
With the electrical key transmitter sub-assembly in the cabin, the engine switch is pressed.
When the transmitter battery of the ele ...
Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual > Lighting (ext): Front Side Marker Light Bulb
ReplacementREPLACEMENT CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
PROCEDURE 1. DISCONNECT FRONT FENDER MOULDING SUB-ASSEMBLY (for TMMC Made) Click here 2. REMOVE FRONT SIDE MARKER LIGHT BULB (a) except TM ...