Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual: Data List / Active Test
DATA LIST / ACTIVE TEST
DATA LIST
NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
HINT:
Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Front Radar Sensor / Data List.
(e) Read the Data List according to the display on the Techstream.
Body Electrical > Front Radar Sensor > Data List| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Total Distance Traveled | - | - | - | Cannot be used |
| Total Distance Traveled - Unit | - | - | - | Cannot be used |
| Vehicle Setting Value Delta X | Sensor position | Min.: -1.28 m, Max.: 1.27 m | Actual sensor position displayed | - |
| Vehicle Setting Value Delta Z | Sensor position | Min.: 0.00 m, Max.: 655.35 m | Actual sensor position displayed | - |
| Vehicle Setting Value H | Sensor position | Min.: 0.00 m, Max.: 2.55 m | Actual sensor position displayed | - |
| Optical Axis Not Adjusted Status | Beam axis not adjusted status | Not Complete or Complete | Not Complete: Beam axis adjustment not completed Complete: Beam axis adjustment completed | - |
| Optical Axis Adjustment Angle (Horizontal) (Latest) | Latest beam axis adjustment angle value (horizontal) | Min.: -12.8 deg, Max.: 12.7 deg | Adjusted angle of beam axis alignment (Default value: 0.0 deg.) | - |
| Optical Axis Adjustment Angle (Vertical) (Latest) | Latest beam axis adjustment angle value (vertical) | Min.: -12.8 deg, Max.: 12.7 deg | Adjusted angle of beam axis alignment (Default value: 0.0 deg.) | - |
| Optical Axis Adjustment Angle (Horizontal) (2nd Latest) | 2nd latest beam axis adjustment angle value (horizontal) | Min.: -12.8 deg, Max.: 12.7 deg | Adjusted angle of beam axis alignment (Default value: 0.0 deg.) | - |
| Optical Axis Adjustment Angle (Vertical) (2nd Latest) | 2nd latest beam axis adjustment angle value (vertical) | Min.: -12.8 deg, Max.: 12.7 deg | Adjusted angle of beam axis alignment (Default value: 0.0 deg.) | - |
| Optical Axis Offset Angle (Horizontal) | Beam axis offset value (horizontal) | Min.: -12.8 deg, Max.: 12.7 deg | Beam axis offset value | - |
| Optical Axis Offset Angle (Vertical) | Beam axis offset value (vertical) | Min.: -12.8 deg, Max.: 12.7 deg | Beam axis offset value | - |
| Optical Axis Offset Angle (Horizontal) (with On-Line Calibration Angle) | Beam axis offset value (horizontal) (after completing calibration) | Min.: -12.8 deg, Max.: 12.7 deg | Beam axis offset value | - |
| Optical Axis Offset Angle (Vertical) (with On-Line Calibration Angle) | Beam axis offset value (vertical) (after completing calibration) | Min.: -12.8 deg, Max.: 12.7 deg | Beam axis offset value | - |
| Dirt Detection for Radar Cruise | Dirt detection status for radar cruise | OFF or ON | OFF: Dirt not detected ON: Dirt detected | - |
| Dirt Detection for PCS | Dirt detection status for PCS | OFF or ON | OFF: Dirt not detected ON: Dirt detected | - |
| Partially Dirt Detection | Partial dirt detection status | OFF or ON | OFF: Dirt not detected ON: Dirt detected | - |
| Data Flash Malfunction | Data flash malfunction status | OFF or ON | OFF: Normal ON: Malfunction detected | - |
| Power Supply Circuit Malfunction | Power supply circuit malfunction status | OFF or ON | OFF: Normal ON: Malfunction detected | - |
| Millimeter-wave Circuit Malfunction | Millimeter-wave radar sensor circuit malfunction status | OFF or ON | OFF: Normal ON: Malfunction detected | - |
| eDMA Transfer Completed Interrupt Malfunction | - | - | - | Cannot be used |
| Acceleration Sensor Malfunction | Acceleration sensor malfunction status | OFF or ON | OFF: Normal ON: Malfunction detected | - |
| IG Voltage Protection | IG voltage protection status | OFF or ON | OFF: Normal ON: Malfunction detected | - |
| Optical Axis Misalignment (Vertical - Acceleration Sensor Method) | Beam axis misalignment (vertical) result | OFF or ON | OFF: Normal ON: Misalignment | - |
| Optical Axis Misalignment (Horizontal) | Beam axis misalignment (horizontal) result | OFF or ON | OFF: Normal ON: Misalignment | - |
| Optical Axis Misalignment (Vertical - Acceleration Sensor Method and Recognition Method) | Beam axis misalignment (vertical) result | OFF or ON | OFF: Normal ON: Misalignment | - |
| Communication Error Between Front Radar Sensor and System Control ECU | Communication error status between front radar sensor and system control ECU | OFF or ON | OFF: Normal ON: Malfunction | - |
| Millimeter-wave Circuit Temperature Protection | Millimeter-wave circuit temperature protection status | OFF or ON | OFF: Normal ON: Malfunction | - |
| Destination Malfunction | Destination malfunction status | OFF or ON | OFF: Normal ON: Malfunction | - |
| IG Voltage | IG voltage value | Min.: 0.0 V, Max.: 25.5 V | 11.0 to 14.0 V: Engine switch on (IG) | - |
| Front Radar Sensor Temperature | Temperature of area around millimeter wave radar sensor assembly | Min.: -32768 °C, Max.: 32767 °C | Actual temperature of area around millimeter wave radar sensor displayed | This value differs to the outside temperature. |
| Vehicle Speed | Vehicle speed | Min.: -30 km/h (-19 mph), Max.: 225.99 km/h (159 mph) | Almost same as actual vehicle speed | - |
| On-Line Calibration Angle (Horizontal) | Calibrated angle value (horizontal) | Min.: -12.8 deg, Max.: 12.7 deg | Learned value | - |
| On-Line Calibration Angle (Vertical) | Calibrated angle value (vertical) | Min.: -12.8 deg, Max.: 12.7 deg | Learned value | - |
Freeze Frame Data
FREEZE FRAME DATA DESCRIPTION (a) Whenever a front radar sensor system DTC is stored, the millimeter wave radar sensor assembly stores the current vehicle state as Freeze Frame Data. CHECK FREEZE FRAM ...
Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART Front Radar Sensor System DTC No. Detection Item Link C1A1100 Front Radar Sensor Optical Axis Misalignment Malfunction C1A8C46 Main Microcomputer ...
Other materials:
Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual > Safety Connect System: Acn Call End
ACN CALL END ACN CALL END This function terminates the ACN (Automatic Collision Notification) to the telematics provider. After a collision in which the DCM receives "Collision Detection Signal", the vehicle will send the emergency call notification to the telematics provider until the emergency cal ...
Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual > Rear Combination Light Assembly (w/ Rear No. 2 Seat): Reassembly
REASSEMBLY CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
PROCEDURE 1. INSTALL REAR COMBINATION LIGHT LENS AND BODY (for Bulb Type Turn Signal Light) 2. INSTALL REAR COMBINATION LIGHT BRACKET (for Bulb Type Turn S ...
Lexus RX (RX 350L, RX450h) 2016-{YEAR} Owners Manual
- For your information
- Pictorial index
- For safety and security
- Instrument cluster
- Operation of each component
- Driving
- Lexus Display Audio system
- Interior features
- Maintenance and care
- When trouble arises
- Vehicle specifications
- For owners
Lexus RX (RX 350L, RX450h) 2016-{YEAR} Repair Manual
0.0172