FAIL-SAFE CHART
FAIL-SAFE FUNCTION
(a) When a malfunction occurs in the lane control system, a message will be displayed on the multi-information display and, depending on the malfunction, functions of the lane control system will be disabled.
Warning Message | Cause | Fail-safe Operation | Conditions to Return to Normal Condition | |||
---|---|---|---|---|---|---|
Lane Departure Alert Function | Steering Assist Function | Lane Centering Function | Vehicle Sway Warning Function | |||
X: Control is suspended | ||||||
LTA Malfunction Visit Your Dealer | Lane control system is malfunctioning HINT: Click here | X | X | X | X | After system returns to normal, engine switch is turned off and then to on (IG) or LTA main switch is turned off and then to on. |
Front Camera Unavailable | Forward recognition camera temperature out of operating range | X | X | X | X | Forward recognition camera temperature returns to normal |
Abnormal forward recognition camera voltage | X | X | X | X | Forward recognition camera voltage returns to normal | |
Forward recognition camera is temporarily unavailable (forward recognition camera recognition stopped) | X | X | X | X | The conditions which prevent the forward recognition camera from performing recognition return to normal. | |
Front Camera Unavailable See Owner's Manual |
| X | X | X | X | Forward recognition camera or area of windshield glass in front of forward recognition camera is cleaned |
LTA Unavailable | Sensor other than forward recognition camera sensor is temporarily unavailable HINT: Click here | X | X | X | X | Temporarily unavailable sensor becomes available |
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Dynamic Radar Cruise Control System: Terminals Of Ecu
TERMINALS OF ECU CHECK ECM HINT: As a waterproof connector is used for the ECM, voltage, resistance and waveform inspections cannot be performed. The voltage, resistance and waveform values are provided for reference only. (a) Measure the voltage and resistance according to the value(s) in the tabl ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Oil Pressure Switch: Removal
REMOVAL PROCEDURE 1. REMOVE FRONT FENDER APRON SEAL RH Click here 2. DRAIN ENGINE OIL Click here 3. REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY (a) Disconnect the wire harness protector. *1 Wire Harness Protector (b) Disconnect the engine oil pressure switch assembl ...