Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual: Terminals Of Ecu

TERMINALS OF ECU

HINT:

Check from the rear of the connector while it is connected to the components.

RADIO RECEIVER ASSEMBLY

Terminal No. (Symbol)

Wiring Color

Terminal Description

Condition

Specified Condition

J151-1 (VMTF) - J148-1 (GND1)

Y - W-B

Visual mute signal

Engine switch on (ACC)

3.5 V or higher → Below 1 V → 3.5 V or higher

J151-5 (CNH1)

V

Local bus communication signal

-

-

J151-6 (CNL1)

W

Local bus communication signal

-

-

J151-13 (CANH)

BE

CAN communication signal

-

-

J151-14 (CANL)

W

CAN communication signal

-

-

J151-15 (ILL+) - J148-1 (GND1)

V - W-B

Illumination signal

Light control switch off

Below 1 V

Light control switch in tail or head position

11 to 14 V

J151-16 (ILL-) - J148-1 (GND1)

W - W-B

Illumination signal

Light control switch off

Below 1 V

Light control switch in tail or head position

Pulse generation

J151-19 (IG) - J148-1 (GND1)

L - W-B

Power source (IG)

Engine switch off

Below 1 V

Engine switch on (IG)

11 to 14 V

J151-21 (MIN+) - J148-1 (GND1)

P - W-B

Microphone voice signal

See "Microphone Check" in Operation Check

-

J151-22 (MIN-) - Body ground

G - Body ground

Microphone voice signal

See "Microphone Check" in Operation Check

-

J151-23 (MACC) - J148-1 (GND1)

L - W-B

Microphone power supply

Engine switch off

Below 1 V

Engine switch on (ACC)

4 to 6 V

J151-24 (SGND) - Body ground

Shielded - Body ground

Shield ground

Always

Below 1 Ω

J151-25 (SNS2) - J148-1 (GND1)

SB - W-B

Microphone connection detection signal

Always

Below 1 V

J148-1 (GND1) - Body ground

W-B - Body ground

Ground

Always

Below 1 Ω

J148-2 (GND2) - Body ground

R - Body ground

Ground

Always

Below 1 Ω

J148-3 (+B) - J148-1 (GND1)

B - W-B

Power source (+B)

Always

11 to 14 V

J148-4 (+B1) - J148-1 (GND1)

LA-BE - W-B

Power source (+B)

Always

11 to 14 V

J148-5 (TX1+)

GR

AVC-LAN communication signal

-

-

J148-6 (TX1-)

V

AVC-LAN communication signal

-

-

J148-10 (AGND) - Body ground

Shielded - Body ground

Shield ground

Always

Below 1 Ω

J148-11 (VAL+) - J148-13 (VA-)

G - P

Sound signal (Left)

External device system playing (when No. 1 stereo jack adapter assembly used)

A waveform synchronized with sound signals is output

J148-12 (VAR+) - J148-13 (VA-)

L - P

Sound signal (Right)

External device system playing (when No. 1 stereo jack adapter assembly used)

A waveform synchronized with sound signals is output

J148-13 (VA-) - J148-1 (GND1)

R - W-B

Sound signal ground

Always

Below 1 V

J148-14 (ADPG) - J148-1 (GND1)

BE - W-B

External device connection detection signal

External device connected

Below 1 V

External device not connected

1.1 to 1.9 V

J148-15 (ACC1) - J148-1 (GND1)

SB - W-B

Power source (ACC)

Engine switch off

Below 1 V

Engine switch on (ACC)

11 to 14 V

J148-16 (ACC) - J148-1 (GND1)

L - W-B

Power source (ACC)

Engine switch off

Below 1 V

Engine switch on (ACC)

11 to 14 V

J148-21 (SW1) - J148-24 (SWG)

V - L

Steering pad switch signal

No switch pushed

2.97 to 3.56 V

Seek+ switch pushed

0.27 to 0.35 V

Seek- switch pushed

0.86 to 1.03 V

Volume+ switch pushed

1.51 to 1.79 V

Volume- switch pushed

2.22 to 2.66 V

J148-22 (SW2) - J148-24 (SWG)

G - L

Steering pad switch signal

No switch pushed

2.97 to 3.56 V

MODE switch pushed

0.27 to 0.35 V

On/off hook switch pushed

1.51 to 1.79 V

Voice switch pushed

2.22 to 2.66 V

J148-24 (SWG) - Body ground

L - Body ground

Steering pad switch signal

Always

Below 1 Ω

J148-27 (SPD) - J148-1 (GND1)

BR - W-B

Vehicle speed signal

See "Vehicle Signal Check Mode" in Operation Check

-

J149-7 (SUP) - J148-1 (GND1)

R - W-B

Start up signal

20 seconds elapse after turning the engine switch on (ACC)

11 to 14 V

J149-19 (RST)*

W

-

-

-

J149-22 (SI+) - J148-1 (GND1)

Y - W-B

Voice signal

Voice guidance sounding

A waveform synchronized with sound is output

J149-23 (SI-) - J148-1 (GND1)

BR - W-B

Voice signal

Voice guidance sounding

A waveform synchronized with sound is output

J149-24 (SGND) - J148-1 (GND1)

Shielded - W-B

Shield ground

Always

Below 1 Ω

J149-25 (MCO+) - J149-26 (MCO-)

R - G

Microphone voice signal

See "Check Microphone (DCU)" in Operation Check

-

J149-26 (MCO-) - J148-1 (GND1)

G - W-B

Microphone voice signal

See "Check Microphone (DCU)" in Operation Check

-

J149-28 (REV2) - J148-1 (GND1)

GR - W-B

Reverse signal

Engine running, shift position not in R → in R

2 V or less → 11 to 14 V

J166-1 (GVI-)

-

Video signal (Digital)

-

-

J166-2 (GVI+)

-

Video signal (Digital)

-

-

J166-3 (GVG1) - Body ground

Shielded - Body ground

Shield ground

Always

Below 1 Ω

z31-1 (GV2-)

-

Video signal (Digital)

-

-

z31-2 (GV2+)

-

Video signal (Digital)

-

-

z31-3 (GVG2) - Body ground

Shielded - Body ground

Shield ground

Always

Below 1 Ω

z31-4 (US4+)

-

USB communication line

-

-

z31-5 (US4-)

-

USB communication line

-

-

z31-6 (UGD4) - Body ground

Shielded - Body ground

Shield ground

Always

Below 1 Ω

J122-1 (WUO)

W

MOST communication wake-up signal

-

-

J122-2 (MI+)

-

MOST communication signal

-

-

J122-3 (MI-)

-

MOST communication signal

-

-

J122-4 (SLDI)

Shielded

Shield ground

-

-

J122-5 (MO+)

-

MOST communication signal

-

-

J122-6 (MO-)

-

MOST communication signal

-

-

J122-7 (SLDO)

Shielded

Shield ground

-

-

J169-1 (USV1)

-

Power source

-

-

J169-2 (US1-)

-

Data signal

-

-

J169-3 (US1+)

-

Data signal

-

-

J169-4 (UGD1)

-

Ground

-

-

J169-5 (USG1) - Body ground

Shielded - Body ground

Shield ground

Always

Below 1 Ω

RA-5 (ANT+) - J148-1 (GND1)

- - W-B

Power source of antenna

Engine switch on (ACC)

Radio switch on and AM or FM selected

11 to 14 V

  • *: It is connected, but not used

NAVIGATION ECU

Terminal No. (Symbol)

Wiring Color

Terminal Description

Condition

Specified Condition

J153-6 (VOI+) - J153-23 (GND)

Y - W-B

Voice signal

Voice guidance sounding

A waveform synchronized with sound is output

J153-7 (VOI-) - J153-23 (GND)

BR - W-B

Voice signal

Voice guidance sounding

A waveform synchronized with sound is output

J153-8 (SLD1) - Body ground

Shielded - Body ground

Shield ground

Always

Below 1 Ω

J153-9 (SPD) - J153-23 (GND)

W - W-B

Vehicle speed signal

See "Check GPS and Vehicle Sensors" in Operation Check

-

J153-10 (+B) - J153-23 (GND)

SB - W-B

Power source (+B)

Always

11 to 14 V

J153-13 (MIC+) - J153-23 (GND)

R - W-B

Microphone voice signal

See "Microphone Check (MEU)" in Operation Check

-

J153-14 (MIC-) - Body ground

G - Body ground

Microphone voice signal

See "Microphone Check (MEU)" in Operation Check

-

J153-19 (REV2) - J153-23(GND)

GR - W-B

Reverse signal

Engine running, shift position not in R → in R

2 V or less → 11 to 14 V

J153-21 (SUP) - J153-23 (GND)

R - W-B

Power source (ACC)

20 seconds elapse after turning the engine switch on (ACC)

11 to 14 V

J153-22 (RST)*

W

-

-

-

J153-23 (GND) - Body ground

W-B - Body ground

Ground

Always

Below 1 Ω

z32-1 (GVO-)

-

Video signal (Digital)

-

-

z32-2 (GVO+)

-

Video signal (Digital)

-

-

z32-3 (GVG1) - Body ground

Shielded - Body ground

Shield ground

Always

Below 1 Ω

z32-4 (US4+)

-

USB communication line

-

-

z32-5 (US4-)

-

USB communication line

-

-

z32-6 (UGD4) - Body ground

Shielded - Body ground

Shield ground

Always

Below 1 Ω

  • *: It is connected, but not used

STEREO COMPONENT AMPLIFIER ASSEMBLY

Terminal No. (Symbol)

Wiring Color

Terminal Description

Condition

Specified Condition

J66-1 (+B) - J66-3 (GND)

P - W-B

Power source (+B)

Always

11 to 14 V

J66-3 (GND) - Body ground

W-B - Body ground

Ground

Always

Below 1 V

J66-4 (WFL+) - J66-3 (GND)

L - W-B

Sound signal (Front Left)

Audio system playing

A waveform synchronized with sound signals is output

J66-5 (WFR+) - J66-3 (GND)

G - W-B

Sound signal (Front Right)

Audio system playing

A waveform synchronized with sound signals is output

J66-6 (WF1+) - J66-3 (GND)*1

GR - W-B

Sound signal (Woofer)

Audio system playing

A waveform synchronized with sound signals is output

J66-7 (CTR+) - J66-3 (GND)

L - W-B

Sound signal (Front Center)

Audio system playing

A waveform synchronized with sound signals is output

J66-10 (SL+) - J66-3 (GND)*2

P - W-B

Sound signal (Rear Left)

Audio system playing

A waveform synchronized with sound signals is output

J66-11 (SR+) - J66-3 (GND)*2

W - W-B

Sound signal (Rear Right)

Audio system playing

A waveform synchronized with sound signals is output

J66-12 (FL+) - J66-3 (GND)

R - W-B

Sound signal (Front Left)

Audio system playing

A waveform synchronized with sound signals is output

J66-13 (FR+) - J66-3 (GND)

LG - W-B

Sound signal (Front Right)

Audio system playing

A waveform synchronized with sound signals is output

J66-8 (RL+) - J66-3 (GND)

B - W-B

Sound signal (Rear Left)

Audio system playing

A waveform synchronized with sound signals is output

J66-9 (RR+) - J66-3 (GND)

R - W-B

Sound signal (Rear Right)

Audio system playing

A waveform synchronized with sound signals is output

J66-16 (+B2) - J66-3 (GND)

L - W-B

Power source (+B)

Always

11 to 14 V

J66-17 (SPD) - J66-3 (GND)

Y - W-B

Vehicle speed signal

Engine switch on (IG)

Wheel being rotated

Pulse generation

J66-18 (GND2) - Body ground

W-B - Body ground

Ground

Always

Below 1 V

J66-19 (WFL-) - J66-3 (GND)

LG - W-B

Sound signal (Front Left)

Audio system playing

A waveform synchronized with sound signals is output

J66-20 (WFR-) - J66-3 (GND)

R - W-B

Sound signal (Front Right)

Audio system playing

A waveform synchronized with sound signals is output

J66-21 (WF1-) - J66-3 (GND)*1

W - W-B

Sound signal (Woofer)

Audio system playing

A waveform synchronized with sound signals is output

J66-22 (CTR-) - J66-3 (GND)

P - W-B

Sound signal (Front Center)

Audio system playing

A waveform synchronized with sound signals is output

J66-25 (SL-) - J66-3 (GND)*2

R - W-B

Sound signal (Rear Left)

Audio system playing

A waveform synchronized with sound signals is output

J66-26 (SR-) - J66-3 (GND)*2

GR - W-B

Sound signal (Rear Right)

Audio system playing

A waveform synchronized with sound signals is output

J66-27 (FL-) - J66-3 (GND)

BR - W-B

Sound signal (Front Left)

Audio system playing

A waveform synchronized with sound signals is output

J66-28 (FR-) - J66-3 (GND)

L - W-B

Sound signal (Front Right)

Audio system playing

A waveform synchronized with sound signals is output

J66-23 (RL-) - J66-3 (GND)

Y - W-B

Sound signal (Rear Left)

Audio system playing

A waveform synchronized with sound signals is output

J66-24 (RR-) - J66-3 (GND)

W - W-B

Sound signal (Rear Right)

Audio system playing

A waveform synchronized with sound signals is output

J123-2 (MI+)

B

MOST communication signal

-

-

J123-3 (MI-)

B

MOST communication signal

-

-

J123-4 (SLDI)

Shield

Shield ground

-

-

J123-5 (MO+)

B

MOST communication signal

-

-

J123-6 (MO-)

B

MOST communication signal

-

-

J123-7 (SLDO)

Shield

Shield ground

-

-

J123-8 (WUI)

W

MOST communication wake-up signal

-

-

  • *1: except 9 Speakers
  • *2: for 15 Speakers

Terminal No. (Symbol)

Wiring Color

Terminal Description

Condition

Specified Condition

J56-2 (ILL) - J56-13 (GND1)

LG - LA

Illumination signal

Light control switch off

Below 1 V

Light control switch in tail or head position

11 to 14 V

J56-7 (TX+)

GR

AVC-LAN communication signal

-

-

J56-8 (V+) - J56-9 (V-)*1

W - R

Video signal

Engine switch on (IG)

Shift lever in R

Camera lens not covered, displaying image

Pulse generation

(Refer to waveform 1)

Engine switch on (IG)

Shift lever in R

Camera lens covered, blacking out screen

Pulse generation

(Refer to waveform 2)

J56-9 (V-) - J56-13 (GND1)*1

R - LA

Ground

Always

Below 1 V

J56-10 (CA+) - J56-21(CGND)*1

B - G

Rear television camera assembly power supply

Engine switch on (ACC)

5.5 to 7.05 V

J56-11 (VMT1) - J56-13 (GND1)

Y - LA

Visual mute signal

When image on display switches

3.5 V or higher

→ Below 1 V

→ 3.5 V or higher

J56-12 (B) - J56-13 (GND1)

LA-B - LA

Power source (+B)

Always

11 to 14 V

J56-13 (GND1) - Body ground

LA - Body ground

Ground

Always

Below 1 Ω

J56-19 (TX-)

V

AVC-LAN communication signal

-

-

J56-20 (CSLD) - Body ground*1

Shielded - Body ground

Shield ground

Always

Below 1 Ω

J56-21 (CGND) - Body ground*1

G - Body ground

Camera ground

Always

Below 1 Ω

J56-24 (ACC) - J56-13 (GND1)

BE - LA

Power source (ACC)

Engine switch off

Below 1 V

Engine switch on (ACC)

11 to 14 V

J171-1 (GVI+)*2

-

Video signal (Digital)

-

-

J171-2 (GVI-)*2

-

Video signal (Digital)

-

-

J171-3 (GVG1)*2

Shielded

Shield ground

-

-

J165-1 (GV+)

-

Video signal (Digital)

-

-

J165-2 (GV-)

-

Video signal (Digital)

-

-

J165-3 (GVG)

Shielded

Shield ground

-

-

MULTI-DISPLAY ASSEMBLY

  • *1: w/ Parking Assist Monitor System

    *2: w/ Panoramic View Monitor System

(a) Reference (Oscilloscope waveform):

(w/ Parking Assist Monitor System)

(1) Waveform 1 (camera lens not covered, displaying an image)

Item

Content

Measurement terminal

J56-8 (V+) - J56-9 (V-)

Measurement setting

200 mV/DIV., 50 μs/DIV.

Condition

Engine switch on (IG), shift lever in R

HINT:

  • The video waveform changes according to the image sent by the rear television camera assembly.
  • The video waveform is constantly output when the engine switch is on (ACC).

*a

Waveform 1 (camera lens is not covered, displaying an image)

*b

Waveform 2 (camera lens is covered, blacking out the screen)

*c

Synchronization Signal

*d

Video Waveform

(2) Waveform 2 (camera lens covered, blacking out the screen)

Item

Content

Measurement terminal

J56-8 (V+) - J56-9 (V-)

Measurement setting

200 mV/DIV., 50 μs/DIV.

Condition

Engine switch on (IG), shift lever in R

HINT:

  • The video waveform changes according to the image sent by the rear television camera assembly.
  • The video waveform is constantly output when the engine switch is on (ACC).

REMOTE TOUCH (REMOTE OPERATION CONTROLLER ASSEMBLY)

Terminal No. (Symbol)

Wiring Color

Terminal Description

Condition

Specified Condition

J154-1 (+B) - J154-10 (GND)

LA-SB - W-B

Power source (+B)

Always

11 to 14 V

J154-2 (ILL+) - J154-10 (GND)

V - W-B

Illumination signal

Light control switch off

Below 1 V

Light control switch in tail or head position

11 to 14 V

J154-5 (ILL-) - J154-10 (GND)

B - W-B

Illumination signal

Light control switch off

Below 1 V

Light control switch in tail or head position

Pulse generation

J154-6 (ACC) - J154-10 (GND)

R - W-B

Power source (ACC)

Engine switch on (ACC)

11 to 14 V

Engine switch off

Below 1 V

J154-8 (MO-)

W

Local bus communication signal

-

-

J154-9 (MO+)

P

Local bus communication signal

-

-

J154-10 (GND) - Body ground

W-B - Body ground

Ground

Always

Below 1 Ω

CLOCK ASSEMBLY

Terminal No.

(Symbol)

Wiring Color

Terminal Description

Condition

Specified Condition

J79-1 (B) - J79-7 (E)

P - W-B

Power source (+B)

Always

11 to 14 V

J79-2 (ACC) - J79-7 (E)

LG - W-B

Power source (ACC)

Engine switch off

Below 1 V

Engine switch on (ACC)

11 to 14 V

J79-5 (TX+1)

Y

Local bus communication signal

-

-

J79-6 (TX-1)

W

Local bus communication signal

-

-

J79-7 (E) - Body ground

W-B - Body ground

Ground

Always

Below 1 V

COMBINATION METER ASSEMBLY

Click here

HEADUP DISPLAY (METER MIRROR SUB-ASSEMBLY) (w/ Headup Display System)

Click here

REAR TELEVISION CAMERA ASSEMBLY (w/ Parking Assist Monitor System)

Click here

PARKING ASSIST ECU (w/ Panoramic View Monitor System)

Click here

    Freeze Frame Data
    FREEZE FRAME DATA CHECK FREEZE FRAME DATA (a) Connect the Techstream to the DLC3. (b) Turn the engine switch on (IG). (c) Turn the Techstream on. (d) Enter the following menus: Body Electrical / Navig ...

    Dtc Check / Clear
    DTC CHECK / CLEAR CHECK DTC (CHECK USING TECHSTREAM) (a) Connect the Techstream to the DLC3. (b) Turn the engine switch on (IG) and wait for 90 seconds. (c) Turn the Techstream on. (d) Enter the follo ...

    Other materials:

    Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual > Lighting System: Interior Light Auto Cut Circuit
    DESCRIPTION When the battery saving control operates, the main body ECU (multiplex network body ECU) controls the operation of the DOME CUT relay that is built into the instrument panel junction block assembly to turn off the interior lights. WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE: Inspec ...

    Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual > Sliding Roof Housing (for Panoramic Moon Roof): Removal
    REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during sliding roof glass sub-assembly, sliding roof housing panel, sliding roof drive gear assembly, sliding r ...

    Lexus RX (RX 350L, RX450h) 2016-{YEAR} Owners Manual

    Lexus RX (RX 350L, RX450h) 2016-{YEAR} Repair Manual

    © 2024 Copyright www.lexusrx.net
    0.0174