CUSTOMIZE PARAMETERS
CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM
HINT:
The following items can be customized.
NOTICE:
(a) Customizing with the Techstream
(1) Connect the Techstream to the DLC3.
(2) Turn the engine switch on (IG).
(3) Turn the Techstream on.
(4) Enter the following menus: Body Electrical / Tilt & Telescopic / Utility / Customize.
(5) Select the setting by referring to the table below.
Tilt & Telesco Tester Display | Description | Default | Setting | ECU |
---|---|---|---|---|
Autoaway/Return function | Turn the auto away/return function | ON | 00000000:ON,01010101:OFF | Multiplex tilt and telescopic ECU |
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Rear No. 1 Seat Outer Belt Assembly: Inspection
INSPECTION PROCEDURE 1. INSPECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY (a) Before installing the rear No. 1 seat outer belt assembly, check the ELR function. NOTICE: Do not disassemble the retractor. (1) When the inclination of the retractor is less than 15°, check that the belt can be pulled from ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Audio And Visual System (for 8 Inch Display): Sound Signal Circuit between Radio Receiver and Stereo Jack Adapter
DESCRIPTION The No. 1 stereo jack adapter assembly sends the sound signal from an external device to the radio receiver assembly via this circuit. WIRING DIAGRAM PROCEDURE 1. CHECK HARNESS AND CONNECTOR (RADIO RECEIVER ASSEMBLY - NO. 1 STEREO JACK ADAPTER ASSEMBLY) (a) Disconnect the J148 ...