DISASSEMBLY
CAUTION / NOTICE / HINT
NOTICE:
PROCEDURE
1. REMOVE STEERING LOCK ACTUATOR OR UPPER BRACKET ASSEMBLY
(a) Secure the steering column assembly in a vise between aluminum plates and cloths.
NOTICE:
Do not overtighten the vise.
(b) Using a drill, drill a hole in the steering lock set bolt and insert a screw extractor.
(c) Using the screw extractor, remove the 2 steering lock set bolts and steering lock actuator or upper bracket assembly. |
|
2. REMOVE MULTIPLEX TILT AND TELESCOPIC ECU
(a) Using a screwdriver with its tip wrapped with protective tape, disengage the claw and remove the multiplex tilt and telescopic ECU. |
|
3. REMOVE POWER STEERING ECU ASSEMBLY
Click here
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Pre-collision System: Terminals Of Ecu
TERMINALS OF ECU NOTICE:
DTCs may be output when connectors are disconnected during inspection. Therefore, be sure to clear the DTCs using the Techstream once the inspection has been completed.
Do not apply excessive force to the forward recognition camera connector.
CHECK FORWARD RECOGNITI ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Sfi System: A/F (O2) Sensor Positive Current Control Bank 1 Sensor 1 Circuit Short to Ground (P223711,...,P225412)
DESCRIPTION Refer to DTC P219519. Click here HINT: Although the DTC titles say O2 sensor, these DTCs relate to the air fuel ratio sensor. DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory Note P223711 A/F (O2) Sensor Positive Current Control Bank 1 Sensor ...