INSTALLATION
CAUTION / NOTICE / HINT
HINT:
PROCEDURE
1. INSTALL BACK DOOR DAMPER STAY LOWER BRACKET
(a) Clean the bolt holes in the vehicle body.
(b) Install the back door damper stay lower bracket with the 2 bolts. Torque: 8.0 N·m {82 kgf·cm, 71 in·lbf} |
|
2. INSTALL BACK DOOR DAMPER STAY UPPER BRACKET
(a) Clean the bolt holes in the vehicle body.
(b) Install the back door damper stay upper bracket with 2 new bolts. Torque: 8.0 N·m {82 kgf·cm, 71 in·lbf} |
|
3. INSTALL POWER BACK DOOR UNIT SET ASSEMBLY
NOTICE:
Do not apply any horizontal load to the power back door unit set assembly in order to prevent it from deforming.
(a) Engage the 2 ball joints to install a new power back door unit set assembly. NOTICE: Install the power back door unit set assembly while supporting the back door by hand. |
|
(b) Check that the power back door unit set assembly is engaged to the ball joints and that it cannot be pulled out.
(c) Engage the grommet.
(d) Connect the connector.
4. INSTALL BACK DOOR TRIM PANEL ASSEMBLY (w/o Rear No. 2 Seat)
Click here
5. INSTALL BACK DOOR TRIM PANEL ASSEMBLY (w/ Rear No. 2 Seat)
Click here
6. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY
Click here
7. INSTALL DOOR PULL HANDLE
Click here
8. INSTALL BACK DOOR TRIM BASE
Click here
9. INSTALL BACK DOOR LOCK COVER (w/o Rear No. 2 Seat)
Click here
10. INSTALL BACK DOOR LOCK COVER (w/ Rear No. 2 Seat)
Click here
11. INSTALL BACK DOOR TRIM COVER LH (w/o Rear No. 2 Seat)
Click here
12. INSTALL BACK DOOR TRIM COVER LH (w/ Rear No. 2 Seat)
Click here
13. INSTALL BACK DOOR TRIM COVER RH
HINT:
Use the same procedure as for the LH side.
14. INSTALL BACK WINDOW UPPER PANEL TRIM (w/o Rear No. 2 Seat)
Click here
15. INSTALL BACK WINDOW UPPER PANEL TRIM (w/ Rear No. 2 Seat)
Click here
16. INITIALIZE POWER BACK DOOR SYSTEM
Click here
17. INSPECT POWER BACK DOOR SYSTEM
Click here
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Fuel Sender Gauge Assembly: Installation
INSTALLATION PROCEDURE 1. INSTALL FUEL SENDER GAUGE ASSEMBLY (a) Engage the claw to install the fuel sender gauge assembly to the fuel suction tube with pump and gauge assembly. NOTICE:
Do not touch the resistance plate or contacts of the fuel sender gauge assembly.
Be careful not to bend the a ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Brake Master Cylinder: Components
COMPONENTS ILLUSTRATION *1 COOL AIR INTAKE DUCT SEAL - - ILLUSTRATION *1 AIR CLEANER CAP WITH AIR CLEANER HOSE *2 AIR CLEANER CASE SUB-ASSEMBLY *3 AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY *4 INLET AIR CLEANER ASSEMBLY *5 V-BANK COVER SUB-ASSEMBLY *6 NO. 1 FU ...