Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual: Precaution
PRECAUTION
PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable from the negative (-) battery terminal, initialize the following systems after the cable is reconnected.
System Name | See Procedure |
Lane Control System | |
Pre-collision System |
Intelligent Clearance Sonar System |
Parking Assist Monitor System |
Panoramic View Monitor System |
Lighting System (w/ Automatic Headlight Beam Level Control System) |
Power Door Lock Control System |
Power Back Door System (w/ Outside Door Control Switch) |
PRECAUTIONS FOR HANDS FREE POWER BACK DOOR (w/ Hands Free Power Back Door)
(a) In the following situations, the hands free power back door may operate unintentionally if the electrical key transmitter sub-assembly is near or within the rear door exterior detection area:
HINT:
Refer to smart access system (for Entry Function)
Click here
-
When a large amount of water is applied to the rear bumper, such as when the vehicle is being washed or in heavy rain.
-
When dirt is wiped off the rear bumper.
-
When a small animal or small object, such as a ball, moves under the rear bumper.
-
When an object is moved from under the rear bumper.
-
If someone is swinging their legs while sitting on the rear bumper.
-
If the legs or another part of someone's body contacts the rear bumper while passing by the vehicle.
-
When the vehicle is parked near an electrical noise source which affects the sensitivity of the Hands Free Power Back Door, such as a pay parking spot, gas station, electrically heated road, or fluorescent light.
-
When the vehicle is near a TV tower, electric power plant, radio station, large display, airport or other facility that generates strong radio waves or electrical noise.
-
When the vehicle is parked in a place where objects such as plants are near the rear bumper.
-
If luggage, etc. is set near the rear bumper.
-
If accessories or a vehicle cover is installed/removed near the rear bumper.
-
When the vehicle is being towed.
(b) In the following situations, the hands free power back door may not operate normally:
-
When a foot remains under the rear bumper.
-
If the rear bumper is strongly hit with a foot or is touched for a while.
-
When standing excessively close to the rear bumper.
-
When an external radio wave source interferes with the communication between the electrical key transmitter sub-assembly and the vehicle.
-
When the vehicle is parked near metal, or an external radio wave or electrical noise source which affects the sensitivity of the Hands Free Power Back Door, such as a pay parking spot, gas station, electrically heated road, fluorescent light, or metal plate.
-
When the vehicle is near a TV tower, electric power plant, radio station, large display, airport or other facility that generates strong radio waves or electrical noise.
-
When a large amount of water is applied to the rear bumper, such as when the vehicle is being washed or in heavy rain.
-
When mud, snow, ice, etc. is attached to the rear bumper.
-
When the vehicle has been parked for a while near objects that may move and contact the rear bumper, such as plants.
-
When an accessory is installed to the rear bumper.
(c) In the following situations, the hands free power back door will not operate:
-
When any of the following conditions are met:
-
The "System Settings" item is set to a value other than "ON" using the customization function via the multi-information display in the combination meter assembly (The default setting is "ON").
Click here
-
The "Kick Sensor" item is set to a value other than "ON" using the customization function via the multi-information display in the combination meter assembly (The default setting is "ON").
Click here
-
The "Kick Sensor Function" item is set to a value other than "ON" using the Techstream customization function (The default setting is "ON").
Click here
-
When the electrical key transmitter sub-assembly is outside of the power back door operation detection area.
-
When the entry function does not operate because of wave interference.
PARTS LOCATION ILLUSTRATION *1 INTEGRATION CONTROL AND PANEL ASSEMBLY *2 POWER BACK DOOR SWITCH *3 COMBINATION METER ASSEMBLY *4 MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) *5 ...
Lexus RX (RX 350L, RX450h) 2016-{YEAR} Owners Manual
Lexus RX (RX 350L, RX450h) 2016-{YEAR} Repair Manual