INSTALLATION
CAUTION / NOTICE / HINT
HINT:
PROCEDURE
1. INSTALL POWER BACK DOOR SENSOR ASSEMBLY (w/o Rear No. 2 Seat)
(a) Engage the clip.
(b) Install the power back door sensor assembly with the 4 screws.
Torque:
3.5 N·m {36 kgf·cm, 31 in·lbf}
(c) Connect the connector.
2. INSTALL POWER BACK DOOR SENSOR ASSEMBLY (w/ Rear No. 2 Seat)
(a) Engage the clip.
(b) Install the power back door sensor assembly with the 4 screws.
Torque:
3.5 N·m {36 kgf·cm, 31 in·lbf}
(c) Connect the connector.
(d) Install the 3 clips.
3. INSTALL BACK DOOR TRIM PANEL ASSEMBLY (w/o Rear No. 2 Seat)
Click here
4. INSTALL BACK DOOR TRIM PANEL ASSEMBLY (w/ Rear No. 2 Seat)
Click here
5. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY
Click here
6. INSTALL DOOR PULL HANDLE
Click here
7. INSTALL BACK DOOR TRIM BASE
Click here
8. INSTALL BACK DOOR LOCK COVER (w/o Rear No. 2 Seat)
Click here
9. INSTALL BACK DOOR LOCK COVER (w/ Rear No. 2 Seat)
Click here
10. INSTALL BACK DOOR TRIM COVER LH (w/o Rear No. 2 Seat)
Click here
11. INSTALL BACK DOOR TRIM COVER LH (w/ Rear No. 2 Seat)
Click here
12. INSTALL BACK DOOR TRIM COVER RH
HINT:
Use the same procedure as for the LH side.
13. INSTALL BACK WINDOW UPPER PANEL TRIM (w/o Rear No. 2 Seat)
Click here
14. INSTALL BACK WINDOW UPPER PANEL TRIM (w/ Rear No. 2 Seat)
Click here
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Automatic Transaxle System: Pressure Control Solenoid "B" Actuator Stuck Off (P07757F)
DESCRIPTION Based on signals from the transmission revolution sensors (NT, NC and NC3), the actual gear is detected. The ECM compares the actual gear with the shift schedule in the ECM memory to detect mechanical malfunctions of the shift solenoid valves, transmission valve body assembly and automat ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Power Back Door System (w/ Outside Door Control Switch): Back Door Closer Switch Malfunction (B2251)
DESCRIPTION The multiplex network door ECU receives signals from the latch switch, position switch, pawl switch and back door courtesy switch, which are built into the back door lock assembly. Based on these signals, the latch position of the back door lock assembly is determined. DTC No. Detec ...