FAIL-SAFE CHART
PULSE FAILURE
(a) If a pulse sensor built into the power window regulator motor assembly malfunctions, the following power window operations will be prohibited.
Multiplex Network Master Switch Assembly, Power Window Regulator Switch Assembly, Rear Power Window Regulator Switch Assembly (for RH and LH Doors) Power Window Operation | Condition | ||
---|---|---|---|
Engine switch on (IG) | Engine switch off (Key-off operation permitted) | Engine switch off (Key-off operation prohibited) | |
Manual up (Switch on the door) | ▲ | X | X |
Manual down (Switch on the door) | ● | X | X |
Auto up (Switch on the door) | X | X | X |
Auto down (Switch on the door) | X | X | X |
Manual up (Remote switch operation) | X | X | X |
Manual down (Remote switch operation) | X | X | X |
Auto up (Remote switch operation) | X | X | X |
Auto down (Remote switch operation) | X | X | X |
Key-linked open and close | X | X | X |
Wireless transmitter-linked open and close | X | X | X |
HINT:
DISPLACEMENT OF NON-DETECTION RANGE TO THE OPENING DIRECTION
(a) If the door glass position or learned value is abnormal, the following power window operations will be prohibited.
Multiplex Network Master Switch Assembly, Power Window Regulator Switch Assembly, Rear Power Window Regulator Switch Assembly (for RH and LH Doors) Power Window Operation | Condition | ||
---|---|---|---|
Engine switch on (IG) | Engine switch off (Key-off operation permitted) | Engine switch off (Key-off operation prohibited) | |
Manual up (Switch on the door) | ● | X | X |
Manual down (Switch on the door) | ● | X | X |
Auto up (Switch on the door) | X | X | X |
Auto down (Switch on the door) | X | X | X |
Manual up (Remote switch operation) | X | X | X |
Manual down (Remote switch operation) | X | X | X |
Auto up (Remote switch operation) | X | X | X |
Auto down (Remote switch operation) | X | X | X |
Key-linked open and close | X | X | X |
Wireless transmitter-linked open and close | X | X | X |
HINT:
INITIAL FAILURE
(a) During initialization, if the power window position or initialization complete status cannot be properly read from the non-volatile memory, the following power window operations will be prohibited.
Multiplex Network Master Switch Assembly, Power Window Regulator Switch Assembly, Rear Power Window Regulator Switch Assembly (for RH and LH Doors) Power Window Operation | Condition | ||
---|---|---|---|
Engine switch on (IG) | Engine switch off (Key-off operation permitted) | Engine switch off (Key-off operation prohibited) | |
Manual up (Switch on the door) | ● | X | X |
Manual down (Switch on the door) | ● | X | X |
Auto up (Switch on the door) | X | X | X |
Auto down (Switch on the door) | X | X | X |
Manual up (Remote switch operation) | X | X | X |
Manual down (Remote switch operation) | X | X | X |
Auto up (Remote switch operation) | X | X | X |
Auto down (Remote switch operation) | X | X | X |
Key-linked open and close | X | X | X |
Wireless transmitter-linked open and close | X | X | X |
HINT:
Click here
LIN COMMUNICATION FAILURE
(a) If the LIN communication system is malfunctioning (communication stop), the following power window control operations will be prohibited. (Operation is only possible using the power window switch of each seat.)
Multiplex Network Master Switch Assembly Power Window Operation | Condition |
---|---|
Always | |
Manual up | ●* |
Manual down | ● |
Auto up | - |
Auto down | - |
Power Window Operation | Condition |
---|---|
Always | |
Manual up | ●* |
Manual down | ● |
Auto up | ●* |
Auto down | ● |
HINT:
Click here
PULSE FAILURE AND LIN COMMUNICATION FAILURE
(a) If the LIN communication system is malfunctioning (communication stop) and the pulse sensor is malfunctioning, the following power window operations will be prohibited.
Multiplex Network Master Switch Assembly, Power Window Regulator Switch Assembly, Rear Power Window Regulator Switch Assembly (for RH and LH Doors) Power Window Operation | Condition |
---|---|
Always | |
Manual up | X |
Manual down | X |
Auto up | X |
Auto down | X |
HINT:
When the jam protection function does not operate due to LIN communication failure, the manual up and auto up functions will not operate as the state of the IG signal is unknown.
Operation is not possible during LIN communication failure.
DISPLACEMENT OF NON-DETECTION RANGE TO THE OPENING DIRECTION AND LIN COMMUNICATION FAILURE / INITIAL FAILURE AND LIN COMMUNICATION FAILURE
(a) If the LIN communication system is malfunctioning and the power window position and learned value are abnormal, or the LIN communication system is malfunctioning and the power window position or initialization complete status cannot be properly read from the non-volatile memory during initialization, the following power window operations will be prohibited.
Multiplex Network Master Switch Assembly Power Window Operation | Condition |
---|---|
Always | |
Manual up | ●* |
Manual down | ● |
Auto up | - |
Auto down | - |
Power Window Operation | Condition |
---|---|
Always | |
Manual up | ●* |
Manual down | ● |
Auto up | X |
Auto down | X |
HINT:
Operation is not possible during LIN communication failure.
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Black Out Tape (for Front Door): Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during black out tape removal/installation are shown below. Necessary Procedures After Parts Removed/Installed/ ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Lighting System (w/o Automatic Headlight Beam Level Control System): Terminals Of Ecu
TERMINALS OF ECU CHECK MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) AND INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY (a) Disconnect the instrument panel junction block assembly and main body ECU (multiplex network body ECU) connectors. (b) Measure the voltage and resistance according to the value(s) in t ...