CUSTOMIZE PARAMETERS
RAIN SENSOR CUSTOMIZE (w/ Auto wiper system)
(a) Customizing with the Techstream
(1) Connect the Techstream to the DLC3.
(2) Turn the engine switch on (IG).
(3) Turn the Techstream on.
(4) Enter the following menus: Body Electrical / Wiper / Utility / Customize.
(5) Select the setting by referring to the table below.
Wiper Tester Display | Description | Default | Setting | ECU |
---|---|---|---|---|
Auto Wiper | Customize setting of AUTO wiper/vehicle speed linked wiper control for vehicles w/ rain sensor | Avail | 0:Avail,1:Not Avl | Rain Sensor |
HINT:
Changes are not valid until the engine switch is off then on (IG).
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Automatic Transaxle System: Brake Switch "B" Circuit Short to Battery (P070312)
DESCRIPTION The purpose of the stop light switch signal circuit is to prevent the engine from stalling when the brakes are suddenly applied while driving in the lock-up condition. When the brake pedal is depressed, the stop light switch assembly sends a signal to the ECM. The ECM then cancels the op ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Dynamic Torque Control Awd System: Diagnosis System
DIAGNOSIS SYSTEM DESCRIPTION Dynamic torque control AWD system data and Diagnostic Trouble Codes (DTCs) can be read through the Data Link Connector 3 (DLC3) of the vehicle. When the system seems to be malfunctioning, use the Techstream to check for malfunctions and perform repairs. CHECK DATA LINK C ...