Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual: System Description

SYSTEM DESCRIPTION

POWER DOOR LOCK CONTROL SYSTEM DESCRIPTION

(a) The power door lock system locks/unlocks all doors.

The main body ECU (multiplex network body ECU) receives lock/unlock request signals from a door control switch or the driver door key lock and unlock switch. Then, the main body ECU (multiplex network body ECU) sends these request signals to the door lock motors in each door to lock/unlock each door in response to the inputs.

FUNCTION OF MAIN COMPONENTS

Component

Function

Multiplex network master switch assembly

  • Door control switch

Driver door control switch on the multiplex network master switch assembly locks or unlocks all doors.

Power window regulator switch assembly

  • Door control switch

Front passenger door control switch on the power window regulator switch assembly locks or unlocks all doors.

Door courtesy light switch assembly

  • Placed on each door.
  • Detects the door status (open or closed) and outputs data to the main body ECU (multiplex network body ECU).
  • Turns on when the door is opened and turns off when the door is closed.

Front door lock with motor assembly LH

  • Built-in motor locks or unlocks the door.
  • Built-in key lock and unlock switch (key-linked) detects the door key operation status (locked or unlocked) and outputs a signal to the main body ECU (multiplex network body ECU).
  • Built-in unlock detection switch detects the door status (locked or unlocked) and outputs a signal to the main body ECU (multiplex network body ECU). This switch turns off when the door is locked and turns on when the door is unlocked.

Front door lock with motor assembly RH

Rear door lock assembly LH/RH

  • Has a built-in motor that locks or unlocks the door.
  • Built-in unlock detection switch detects the door status (locked or unlocked) and outputs a signal to the main body ECU (multiplex network body ECU). This switch turns off when the door is locked and turns on when the door is unlocked.

Back door lock assembly

Built-in motor locks or unlocks the door.

SYSTEM FUNCTION

(a) This system is controlled by the main body ECU (multiplex network body ECU). The main body ECU (multiplex network body ECU) outputs signals to each door lock motor. The power door lock control system has the following functions:

Function

Outline

Manual lock and unlock function

This function can lock or unlock all of the doors by the door control switch operation.

Key-linked lock and unlock function

This function, which is linked with the mechanical key cylinder, can lock or unlock all of the doors when a lock or unlock operation is performed.

Manual unlock prohibition function

When the condition below is met, unlocking the vehicle using the door control switch will be prohibited:

  • The doors are locked using a key-linked operation, wireless key operation or entry operation with all of the doors closed.

Key lock-in prevention function

When the key is in the vehicle, performing the door lock operation will not lock the door.

Key-linked 2-step unlock function

Unlocks only the driver door by turning the key cylinder once and unlocks all of the doors by turning it twice.

Collision door lock release

If the SRS has been deployed and the main body ECU (multiplex network body ECU) has detected the signal that is output from the airbag sensor assembly, the main body ECU (multiplex network body ECU) will unlock all doors.

Shift-linked automatic door lock function*

When the conditions listed below are met consecutively, this function causes all of the doors to be automatically locked:

  • all of the doors are closed.
  • Engine switch is on (IG).
  • With the shift lever in P, the shift lever is moved to any position other than P.
  • Any of the doors is unlocked.

Speed-sensitive automatic door lock function*

When the conditions listed below are met consecutively, this function causes all of the doors to be automatically locked:

  • Vehicle speed is higher than approximately 20 km/h (12 mph).
  • all of the doors are closed.
  • Any of the doors is unlocked.

Shift-linked automatic door unlock function*

When the conditions listed below are met consecutively, this function causes all of the doors to be automatically unlocked:

  • Engine switch is on (IG).
  • With the shift lever in any position other than P, the shift lever is moved to P.

Driver door-linked automatic door unlock*

all of the doors are unlocked automatically when the driver door is opened within approximately 43 seconds of the engine switch being turned from on (IG) to off.

  • *: w/ Auto Lock Function
    Parts Location
    PARTS LOCATION ILLUSTRATION *1 DOOR CONTROL SWITCH *2 MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY *3 DLC3 *4 AIRBAG SENSOR ASSEMBLY *5 MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) ...

    System Diagram
    SYSTEM DIAGRAM Communication Table Sender Receiver Signal Line Multiplex Network Master Switch Assembly Main Body ECU (Multiplex Network Body ECU) Door control switch signal LI ...

    Other materials:

    Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual > Steering Column: Multiplex Tilt And Telescopic Ecu
    ComponentsCOMPONENTS ILLUSTRATION *1 LOWER STEERING COLUMN COVER *2 MULTIPLEX TILT AND TELESCOPIC ECU N*m (kgf*cm, ft.*lbf): Specified torque - - InstallationINSTALLATION PROCEDURE 1. INSTALL MULTIPLEX TILT AND TELESCOPIC ECU (a) Engage the claw to install the multiplex tilt ...

    Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual > Power Door Lock Control System: Terminals Of Ecu
    TERMINALS OF ECU CHECK INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) (a) Remove the main body ECU (multiplex network body ECU) from the instrument panel junction block assembly. Click here (b) Reconnect the instrument panel junction block assembly conne ...

    Lexus RX (RX 350L, RX450h) 2016-{YEAR} Owners Manual

    Lexus RX (RX 350L, RX450h) 2016-{YEAR} Repair Manual

    © 2024 Copyright www.lexusrx.net
    0.0136