PRECAUTION
PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable from the negative (-) battery terminal, initialize the following systems after the cable is reconnected.
System Name | See Procedure |
---|---|
Lane Control System | |
Pre-collision System | |
Intelligent Clearance Sonar System | |
Parking Assist Monitor System | |
Panoramic View Monitor System | |
Lighting System (w/ Automatic Headlight Beam Level Control System) | |
Power Door Lock Control System | |
Power Back Door System (w/ Outside Door Control Switch) |
PRECAUTIONS WHEN USING Techstream
(a) When using the Techstream with the engine switch off, connect the Techstream to the DLC3 and turn a courtesy light switch on and off at intervals of 1.5 seconds or less until communication between the Techstream and the vehicle begins. Then select Model Code "KEY REGIST" under manual mode and enter the following menus: Body Electrical / Smart Access(CAN). While using the Techstream, periodically turn a courtesy light switch on and off at intervals of 1.5 seconds or less to maintain communication between the Techstream and the vehicle.
(b) After all DTCs are cleared, check if the malfunction occurs again 6 seconds after the engine switch is turned on (IG).
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Parking Assist Monitor System: ECU Malfunction (C1611)
DESCRIPTION This DTC is stored if the rear television camera assembly judges that there is an internal malfunction as a result of its self check. HINT: The rear television camera assembly stores different types of information during initialization. If the rear television camera assembly cannot read ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Ambient Light (for Instrument Panel): Installation
INSTALLATION PROCEDURE 1. INSTALL INTERIOR ILLUMINATION LIGHT SUB-ASSEMBLY (a) Engage the 3 claws to install the interior illumination light sub-assembly as shown in the illustration. Install in this Direction 2. INSTALL NO. 2 INSTRUMENT CLUSTER MOULDING Click here 3. INSTALL INSTRUMEN ...