PROCEDURE
1. | CHECK USAGE CONDITION |
(a) Check that the vehicle and cellular phone meet the following conditions:
NOTICE:
If changing cellular phone settings, updating software, etc. is necessary, make sure to obtain the permission of the customer before performing it.
Click here
(b) Connect the cellular phone to the in-vehicle device and check that it is connected correctly.
Result | Proceed to |
---|---|
The cellular phone is connected correctly. | A |
The cellular phone is not connected correctly. | B |
A | END |
|
2. | RESTART CELLULAR PHONE |
(a) Restart the cellular phone.
(b) Turn the engine switch off.
(c) Turn the engine switch on (ACC).
(d) Connect the cellular phone to the in-vehicle device and check that it is connected correctly.
Result | Proceed to |
---|---|
The cellular phone is connected correctly. | A |
The cellular phone is not connected correctly. | B |
A | END |
|
3. | CHECK OPERATION |
(a) Check if the in-vehicle device can be recognized by the cellular phone.
Result | Proceed to |
---|---|
In-vehicle device can be recognized. | A |
In-vehicle device cannot be recognized. | B |
B | GO TO STEP 5 |
|
4. | REGISTER AGAIN |
(a) Clear all "Bluetooth" devices registered to the cellular phone and the radio receiver assembly.
(b) Register the cellular phone again.
(c) Connect the cellular phone to the in-vehicle device and check that it is connected correctly.
Result | Proceed to |
---|---|
The cellular phone is connected correctly. | A |
The cellular phone is not connected correctly. | B |
A | END |
|
5. | CHECK USING ANOTHER VEHICLE |
(a) Check if the customer's cellular phone functions normally using another "Bluetooth" compatible vehicle.
HINT:
Result | Proceed to |
---|---|
The cellular phone is connected correctly. | A |
The cellular phone is not connected correctly. | B |
A | PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE |
|
6. | CHECK USING ANOTHER CELLULAR PHONE |
(a) Check if the system functions normally using another "Bluetooth" compatible cellular phone.
HINT:
Result | Proceed to |
---|---|
The cellular phone is connected correctly. | A |
The cellular phone is not connected correctly. | B |
A | END (ONLY A "Bluetooth" COMPATIBLE CELLULAR PHONE CAN BE USED) |
B | PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE |
Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual > Windshield Outside Moulding: Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during windshield outside moulding removal/installation are shown below. Necessary Procedures After Parts Remov ...
Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual > Intelligent Clearance Sonar System: Brake Hydraulic Pressure Malfunction (C164F)
DESCRIPTION When a malfunction signal sent from the skid control ECU via CAN communication is detected by the clearance warning ECU assembly, DTC C164F is stored. DTC No. Detection Item DTC Detection Condition Trouble Area C164F Brake Hydraulic Pressure Malfunction Brake master cyli ...