INSTALLATION
PROCEDURE
1. INSTALL INNER REAR VIEW MIRROR ASSEMBLY
(a) Slide and temporarily install the inner rear view mirror assembly as shown in the illustration.
![]() | Install in this Direction |
(b) Using a T20 "TORX" socket wrench, install the inner rear view mirror assembly with the screw.
Torque:
1.75 N·m {18 kgf·cm, 15 in·lbf}
(c) Engage the clamp.
(d) Connect the connector.
2. INSTALL NO. 1 FORWARD RECOGNITION COVER
Click here
3. INSTALL NO. 2 FORWARD RECOGNITION COVER
Click here
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Sfi System: Diagnosis System
DIAGNOSIS SYSTEM DESCRIPTION When troubleshooting OBD II (On-Board Diagnostics) vehicles, the Techstream (complying with SAE J1978) must be connected to the DLC3 (Data Link Connector 3) of the vehicle. Various data in the vehicle's ECM (Engine Control Module) can be then read. OBD II regulations re ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Airbag System: Short in D Squib (Dual Stage - 2nd Step) Circuit (B1810-B1813)
DESCRIPTION The driver squib 2nd step circuit consists of the airbag sensor assembly, spiral cable sub-assembly and horn button assembly. The airbag sensor assembly uses this circuit to deploy the airbag when deployment conditions are met. These DTCs are stored when a malfunction is detected in the ...