CUSTOMIZE PARAMETERS
CUSTOMIZE SEAT HEATER SYSTEM
HINT:
The following items can be customized.
NOTICE:
(a) Customizing with the Techstream
(1) Connect the Techstream to the DLC3.
(2) Turn the engine switch on (IG).
(3) Turn the Techstream on.
(4) Enter the following menus: Customize Setting / Seat.
(5) Select the setting by referring to the table below.
Seat Tester Display | Description | Default | Setting | ECU |
---|---|---|---|---|
FL Seat A/C and Heater Sensitivity Adjust | Function to change sensitivity of the seat heater system. | 0 | 10000:-2,01000:-1,00100:0,00010:+1,00001:+2 | Air conditioning amplifier assembly |
FR Seat A/C and Heater Sensitivity Adjust | Function to change sensitivity of the seat heater system. | 0 | 10000:-2,01000:-1,00100:0,00010:+1,00001:+2 | Air conditioning amplifier assembly |
(b) Customizing with the Multi-display
(1) Turn the engine switch on (IG).
(2) Enter the following menus: MENU / Setup / Vehicle / Vehicle Customization / Climate Settings.
(3) Select the setting by referring to the table below.
Display | Default | Content | Setting | Relevant ECU |
---|---|---|---|---|
Auto Seat Temp. FR L | 0 | Function to change sensitivity of the seat heater system. | -2 / -1 / 0 / +1 / +2 | Air conditioning amplifier assembly |
Auto Seat Temp. FR R | 0 | Function to change sensitivity of the seat heater system. | -2 / -1 / 0 / +1 / +2 | Air conditioning amplifier assembly |
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Quarter Window Glass (w/o Rear No. 2 Seat): Installation
INSTALLATION CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
PROCEDURE 1. INSTALL QUARTER WINDOW ASSEMBLY (a) Using a brush, coat the installation surfaces on the vehicle body with primer M. NOTICE:
Do not coat ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Rear Differential Carrier Oil Seal: Replacement
REPLACEMENT CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during diaphragm oil seal replacement are shown below. Necessary Procedures After Parts Removed/Installed/ ...