INSTALLATION
CAUTION / NOTICE / HINT
PROCEDURE
1. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH (for Driver Side)
(a) Install the front seat belt anchor plate as shown in the illustration.
![]() | Install in this Direction |
(b) Install the front seat inner belt assembly LH with the nut. Torque: 42 N·m {428 kgf·cm, 31 ft·lbf} NOTICE: Do not allow the anchor part of the front seat inner belt assembly LH to overlap the protruding part of the front seat adjuster. |
|
(c) Engage the clamp.
(d) Engage each clamp under the front seat assembly.
(e) Connect each connector under the front seat assembly.
2. INSTALL FRONT SEAT INNER BELT ASSEMBLY RH (for Front Passenger Side)
(a) Install the front seat belt anchor plate as shown in the illustration.
![]() | Install in this Direction |
(b) Install the front seat inner belt assembly RH with the nut. Torque: 42 N·m {428 kgf·cm, 31 ft·lbf} NOTICE: Do not allow the anchor part of the front seat inner belt assembly RH to overlap the protruding part of the front seat adjuster. |
|
(c) Engage the clamp.
(d) Engage each clamp under the front seat assembly.
(e) Connect each connector under the front seat assembly.
3. INSTALL FRONT SEAT ASSEMBLY
Click here
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Door Control Transmitter: Inspection
INSPECTION PROCEDURE 1. INSPECT ELECTRICAL KEY TRANSMITTER SUB-ASSEMBLY (a) Inspect the operation of the electrical key transmitter sub-assembly. (Type A) (1) Remove the transmitter battery from the electrical key transmitter sub-assembly. Click here Click here (2) Install a new or known good t ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Roof Drip Side Finish Moulding: Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during roof drip side finish moulding removal/installation are shown below. Necessary Procedures After Parts Re ...