Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual: Inspection

INSPECTION

PROCEDURE

1. INSPECT REAR CENTER SEAT INNER BELT ASSEMBLY

(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

1 - 2

Rear center seat belt unfastened

Below 1 Ω

Rear center seat belt fastened

10 kΩ or higher

If the result is not as specified, replace the rear center seat inner belt assembly.

*a

Component without harness connected

(Rear Center Seat Inner Belt Assembly)

    Removal
    REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during rear ...

    Installation
    INSTALLATION PROCEDURE 1. INSTALL REAR CENTER SEAT INNER BELT ASSEMBLY (a) Install the rear center seat inner belt assembly with the nut. Torque: 42 N·m {428 kgf·cm, 31 ft·lbf} NOTICE: Do not a ...

    Other materials:

    Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Lighting (ext): Rear Turn Signal Light Bulb
    ReplacementREPLACEMENT CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH side and LH side. The following procedure is for the LH side. PROCEDURE 1. REMOVE REAR LIGHT COVER Click here 2. DISCONNECT REAR COMBINATION LIGHT ASSEMBLY (a) Apply protective tape around the rear combi ...

    Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Amplifier Antenna (w/ Rear No. 2 Seat): Installation
    INSTALLATION PROCEDURE 1. INSTALL NO. 1 AMPLIFIER ANTENNA ASSEMBLY (a) Engage the 2 guides. (b) Install the No. 1 amplifier antenna assembly with the bolt. Torque: for Type A : 7.0 N·m {71 kgf·cm, 62 in·lbf} for Type B : 10 N·m {102 kgf·cm, 7 ft·lbf} NOTICE: There are two types of bolts ...

    Lexus RX (RX 350L, RX450h) 2016-{YEAR} Owners Manual

    Lexus RX (RX 350L, RX450h) 2016-{YEAR} Repair Manual

    © 2025 Copyright www.lexusrx.net
    0.0158