CHECK MODE PROCEDURE
CHECK MODE (SIGNAL CHECK): DTC CHECK
(a) Turn the engine switch off.
(b) Connect the Techstream to the DLC3.
(c) Turn the engine switch on (IG).
(d) Turn the Techstream on.
(e) Enter the following menus: Body Electrical / SRS Airbag / Utility / Signal Check.
Body Electrical > SRS Airbag > Utility Tester Display |
---|
Signal Check |
NOTICE:
Select Signal Check on the Techstream to clear the DTCs (both current and history).
HINT:
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Differential Oil Seal (for Rh Side): Replacement
REPLACEMENT CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during transaxle case oil seal and front drive shaft oil seal RH removal/installation are shown below. Nece ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Intuitive Parking Assist System (w/ Intelligent Clearance Sonar System): Clearance Warning ECU Power Source Circuit
DESCRIPTION This circuit provides power to operate the clearance warning ECU assembly. WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE: Inspect the fuses for circuits related to this system before performing the following procedure. PROCEDURE 1. CHECK HARNESS AND CONNECTOR (CLEARANCE WARNING EC ...