CAUTION / NOTICE / HINT
HINT:
PROCEDURE
1. | VEHICLE BROUGHT TO WORKSHOP |
|
2. | CUSTOMER PROBLEM ANALYSIS |
HINT:
What | Vehicle model, system name |
When | Date, time, occurrence frequency, whether the problem occurred recently or has been occurring for a long time |
Where | Whether the problem occurs at a specific location |
Under what conditions? | Whether the doors were locked or unlocked, whether the engine switch was on (IG), whether the engine was running |
How did it happen? | Problem symptoms* |
If the symptoms occurred immediately after purchase or only recently.
If the symptoms occurred even when the electrical key transmitter sub-assembly was near the vehicle (electrical key antenna).
If the electrical key transmitter sub-assembly is being placed within 1 m (3.28 ft.) of items such as TVs, DVD recorders, induction cookers, rice cookers, dishwashers, modems, cell phones, personal computers, microwave ovens, desk or floor lamps, cordless telephones, etc.
The transmitter battery can be checked using the "Key Low Battery" item in the Data List.
Click here
|
3. | PRE-CHECK |
(a) Measure the battery voltage.
Standard Voltage:
11 to 14 V
If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.
(b) Check the fuses and relays.
(c) Check the connector connections and terminals to make sure that there are no abnormalities such as loose connections, deformation, etc.
|
4. | INSPECT COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM* |
(a) Using the Techstream, check for CAN communication system DTCs.
Click here
Result | Proceed to |
---|---|
CAN DTCs are not output | A |
CAN DTCs are output | B |
B | GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING) |
|
5. | INSPECT COMMUNICATION FUNCTION OF LIN COMMUNICATION SYSTEM* |
(a) Using the Techstream, check for LIN communication system DTCs.
Click here
Result | Proceed to |
---|---|
LIN DTCs are not output | A |
LIN DTCs are output | B |
B | GO TO LIN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING) |
|
6. | CHECK FOR DTC* |
(a) Check for DTCs and make a note of any codes that are output.
Body Electrical > Power Source Control > Trouble Codes Body Electrical > Smart Access > Trouble Codes Body Electrical > Starting Control > Trouble Codes Powertrain > Engine > Trouble Codes Result | Proceed to |
---|---|
DTCs are not output | A |
Steering lock system DTCs are output | B |
Immobiliser system DTCs are output | C |
Smart access system with push-button start (for Entry Function) DTCs are output | D |
Smart access system with push-button start (for Start Function) DTCs are output | E |
B | GO TO STEERING LOCK SYSTEM |
C | GO TO IMMOBILISER SYSTEM |
D | GO TO SMART ACCESS SYSTEM WITH PUSH-BUTTON START (for Entry Function) |
E | GO TO DIAGNOSTIC TROUBLE CODE CHART |
|
7. | PROBLEM SYMPTOMS TABLE |
(a) Refer to Problem Symptoms Table.
Click here
Result | Proceed to |
---|---|
Fault is not listed in Problem Symptoms Table | A |
Fault is listed in Problem Symptoms Table | B |
B | GO TO STEP 9 |
|
8. | OVERALL ANALYSIS AND TROUBLESHOOTING* |
(a) Operation Check
Click here
(b) Terminals of ECU
Click here
(c) Data List / Active Test
Click here
|
9. | REPAIR OR REPLACE |
|
10. | CHECK FOR DTC* |
(a) Clear the DTCs.
Body Electrical > Power Source Control > Clear DTCs Body Electrical > Smart Access > Clear DTCs Body Electrical > Starting Control > Clear DTCs Powertrain > Engine > Clear DTCs(b) Check for DTCs.
Body Electrical > Power Source Control > Trouble Codes Body Electrical > Smart Access > Trouble Codes Body Electrical > Starting Control > Trouble Codes Powertrain > Engine > Trouble Codes Result | Proceed to |
---|---|
DTCs are not output | A |
DTCs are output | B |
A | END |
B | GO TO DIAGNOSTIC TROUBLE CODE CHART |
Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual > Power Tilt And Power Telescopic Steering Column System: Freeze Frame Data
FREEZE FRAME DATA FREEZE FRAME DATA NOTICE:
Freeze frame data values will vary depending on the measurement conditions, surroundings, or vehicle conditions. For this reason, there may be a problem even when the values are within specifications.
Turn the engine switch on (IG) and park the vehicl ...
Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual > Sfi System: Engine Stall History (P160300)
DESCRIPTION After starting the engine, this DTC is stored when the engine stops without the engine switch being operated. Using the Techstream, the conditions present when the DTC was stored can be confirmed by referring to the freeze frame data. Freeze frame data records engine conditions when a ma ...