INSTALLATION
PROCEDURE
1. INSTALL STEREO COMPONENT AMPLIFIER ASSEMBLY
2. INSTALL NO. 2 AMPLIFIER BRACKET
(a) Install the No. 2 amplifier bracket with the 2 screws.
3. INSTALL NO. 1 AMPLIFIER BRACKET
(a) Install the No. 1 amplifier bracket with the 2 screws.
4. INSTALL STEREO COMPONENT AMPLIFIER ASSEMBLY WITH BRACKET (for TMMC Made)
(a) Install the stereo component amplifier assembly with bracket with the 2 bolts and nut.
Torque:
7.5 N·m {76 kgf·cm, 66 in·lbf}
(b) Engage the 2 clamps.
(c) Connect each connector.
5. INSTALL STEREO COMPONENT AMPLIFIER ASSEMBLY WITH BRACKET (for TMC Made)
(a) Install the stereo component amplifier assembly with bracket with the 3 nuts.
Torque:
7.5 N·m {76 kgf·cm, 66 in·lbf}
(b) Engage the clamp.
(c) Connect each connector.
6. INSTALL CONSOLE BOX ASSEMBLY
Click here
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Instrument Panel Safety Pad: Precaution
PRECAUTION PRECAUTION FOR VEHICLE WITH SRS AIRBAG AND SEAT BELT PRETENSIONER (a) Some operations in this section may affect the SRS parts. Prior to performing the corresponding operations, read the precautions regarding the SRS parts. Click here TABLE OF BOLT, SCREW AND NUT HINT: All bolts, screws ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Curtain Shield Airbag Assembly (w/ Rear No. 2 Seat): On-vehicle Inspection
ON-VEHICLE INSPECTION CAUTION / NOTICE / HINT CAUTION: Be sure to correctly follow the removal and installation procedures for the curtain shield airbag assemblies. PROCEDURE 1. INSPECT CURTAIN SHIELD AIRBAG ASSEMBLY (for Vehicle not Involved in Collision) (a) Perform a diagnostic system check. Clic ...