Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual: Inspection

INSPECTION

PROCEDURE

1. INSPECT REAR CENTER ULTRASONIC SENSOR

(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

4 (BI) - 6 (EI)

Always

10 kΩ or higher

4 (BI) - 1 (BO)

Always

Below 1 Ω

5 (SI) - 2 (SO)

Always

Below 30 Ω

6 (EI) - 3 (EO)

Always

Below 1 Ω

If the result is not as specified, replace the rear center ultrasonic sensor.

*a

Component without harness connected

(Rear Center Ultrasonic Sensor)

2. INSPECT REAR CORNER ULTRASONIC SENSOR

(a) for RH Side:

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

4 (BI) - 6 (EI)

Always

10 kΩ or higher

4 (BI) - 1 (BO)

Always

Below 1 Ω

5 (SI) - 2 (SO)

Always

Below 30 Ω

6 (EI) - 3 (EO)

Always

Below 1 Ω

If the result is not as specified, replace the rear corner ultrasonic sensor RH.

*a

Component without harness connected

(Rear Corner Ultrasonic Sensor RH)

(b) for LH Side:

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

4 (BI) - 6 (EI)

Always

10 kΩ or higher

4 (BI) - 1

Always

Below 1 Ω

5 (SI) - 2

Always

Below 30 Ω

6 (EI) - 3

Always

Below 1 Ω

If the result is not as specified, replace the rear corner ultrasonic sensor LH.

*a

Component without harness connected

(Rear Corner Ultrasonic Sensor LH)

    Components
    COMPONENTS ILLUSTRATION *A for RH Side with Rear No. 2 Seat - - *1 REAR CENTER ULTRASONIC SENSOR *2 REAR CENTER ULTRASONIC SENSOR RETAINER *3 REAR CORNER ULTRASONIC SENSOR ...

    Removal
    REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during ult ...

    Other materials:

    Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual > Sfi System: Crankshaft Position - Camshaft Position Correlation Bank 1 Sensor B (P001700,P001900)
    DESCRIPTION In the VVT (Variable Valve Timing) system, the appropriate exhaust valve open and close timing is controlled by the ECM. The ECM performs exhaust valve control by performing the following: 1) controlling the exhaust camshaft cam timing oil control solenoid assembly, camshaft timing gear ...

    Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual > Front Drive Shaft Assembly: Reassembly
    REASSEMBLY PROCEDURE 1. INSTALL FRONT DRIVE SHAFT BEARING (for RH Side) (a) Using SST, a steel plate and a press, install a new front drive shaft bearing. SST: 09527-10011 NOTICE: The bearing should be completely installed. *a Steel Plate (b) Using a snap ring expander, ...

    Lexus RX (RX 350L, RX450h) 2016-{YEAR} Owners Manual

    Lexus RX (RX 350L, RX450h) 2016-{YEAR} Repair Manual

    © 2024 Copyright www.lexusrx.net
    0.0113