Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual: Remote Service Malfunction

PROCEDURE

1.

CHECK CAN COMMUNICATION SYSTEM

(a) Connect the Techstream to the DLC3.

(b) Turn the engine switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Bus Check.

Click here

(e) Check that all ECUs and sensors that use CAN communication are connected.

Result

Proceed to

There are no connection problems.

A

There is a connection problem.

B

B

GO TO CAN COMMUNICATION SYSTEM

A

2.

CHECK DTC OUTPUT

(a) Connect the Techstream to the DLC3.

(b) Turn the engine switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Health Check.

(e) Check for DTCs.

Result

Proceed to

DTCs are not output.

A

DTCs are output.

B

B

INSPECT EACH ECU SYSTEM

A

3.

CHECK OPERATION OF EACH SYSTEM

(a) Check that each system related to Lexus Enform Remote operates normally.

(1) Check power door lock control system

Click here

(2) Check smart access system with push-button start (for Entry Function)

Click here

(3) Check smart access system with push-button start (for Start Function)

Click here

(4) Check theft deterrent system

Click here

(5) Check meter/gauge system

Click here

(6) Check lighting system (EXT)

w/ Automatic Headlight Beam Level Control System: Click here

w/o Automatic Headlight Beam Level Control System: Click here

(7) Check air conditioning system

Click here

Result

Proceed to

All of the systems related to Lexus Enform Remote operate normally.

A

Any system related to Lexus Enform Remote does not operate normally.

B

B

GO TO ABNORMAL SYSTEM

A

4.

CHECK DCM OPERATION HISTORY

(a) Check DCM Operation History.

Click here

NEXT

CONTACT SERVICE CENTER

    Warning Notification Function Malfunction
    PROCEDURE 1. CHECK PROBLEM SYMPTOM (WARNING NOTIFICATION FUNCTION) (a) Check the problem symptom. (1) Check the problem symptom of the warning notification function. Result Proceed to ...

    Brake
    ...

    Other materials:

    Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Lexus Enform System: DCM Data Signal Circuit between Navigation ECU and DCM
    DESCRIPTION This circuit is used to send and receive signals between the DCM (Telematics Transceiver), radio receiver assembly and navigation ECU. WIRING DIAGRAM PROCEDURE 1. CHECK HARNESS AND CONNECTOR (RADIO RECEIVER ASSEMBLY - DCM (TELEMATICS TRANSCEIVER)) (a) Disconnect the J157 DCM (T ...

    Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Blind Spot Monitor System: Data List / Active Test
    DATA LIST / ACTIVE TEST DATA LIST NOTICE: In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not. HINT: Using the Techstream to read the Data List allows the values or states of ...

    Lexus RX (RX 350L, RX450h) 2016-{YEAR} Owners Manual

    Lexus RX (RX 350L, RX450h) 2016-{YEAR} Repair Manual

    © 2025 Copyright www.lexusrx.net
    0.0127