PARTS LOCATION
ILLUSTRATION
*A | w/o AVS | *B | for 2WD |
*C | for AWD | - | - |
*1 | FRONT SPEED SENSOR RH | *2 | FRONT SPEED SENSOR LH |
*3 | FRONT AXLE HUB SUB-ASSEMBLY RH - FRONT SPEED SENSOR ROTOR RH | *4 | FRONT AXLE HUB SUB-ASSEMBLY LH - FRONT SPEED SENSOR ROTOR LH |
*5 | REAR SKID CONTROL SENSOR WIRE RH NO. 1 | *6 | REAR SKID CONTROL SENSOR WIRE LH NO. 1 |
*7 | REAR AXLE HUB AND BEARING ASSEMBLY RH - REAR SPEED SENSOR ROTOR RH - REAR SPEED SENSOR RH | *8 | REAR AXLE HUB AND BEARING ASSEMBLY LH - REAR SPEED SENSOR ROTOR LH - REAR SPEED SENSOR LH |
*9 | REAR SPEED SENSOR RH | *10 | REAR SPEED SENSOR LH |
*11 | REAR AXLE HUB AND BEARING ASSEMBLY RH - REAR SPEED SENSOR ROTOR RH | *12 | REAR AXLE HUB AND BEARING ASSEMBLY LH - REAR SPEED SENSOR ROTOR LH |
ILLUSTRATION
*A | w/ AVS | *B | for 2WD |
*C | for AWD | - | - |
*1 | FRONT SPEED SENSOR RH | *2 | FRONT SPEED SENSOR LH |
*3 | FRONT AXLE HUB SUB-ASSEMBLY RH - FRONT SPEED SENSOR ROTOR RH | *4 | FRONT AXLE HUB SUB-ASSEMBLY LH - FRONT SPEED SENSOR ROTOR LH |
*5 | FRONT SKID CONTROL SENSOR WIRE RH | *6 | FRONT SKID CONTROL SENSOR WIRE LH |
*7 | REAR AXLE HUB AND BEARING ASSEMBLY RH - REAR SPEED SENSOR ROTOR RH - REAR SPEED SENSOR RH | *8 | REAR AXLE HUB AND BEARING ASSEMBLY LH - REAR SPEED SENSOR ROTOR LH - REAR SPEED SENSOR LH |
*9 | REAR SKID CONTROL SENSOR WIRE RH NO. 1 | *10 | REAR SKID CONTROL SENSOR WIRE LH NO. 1 |
*11 | REAR SKID CONTROL SENSOR WIRE RH NO. 2 | *12 | REAR SKID CONTROL SENSOR WIRE LH NO. 2 |
*13 | REAR SPEED SENSOR RH | *14 | REAR SPEED SENSOR LH |
*15 | REAR AXLE HUB AND BEARING ASSEMBLY RH - REAR SPEED SENSOR ROTOR RH | *16 | REAR AXLE HUB AND BEARING ASSEMBLY LH - REAR SPEED SENSOR ROTOR LH |
ILLUSTRATION
*1 | BRAKE ACTUATOR ASSEMBLY - SKID CONTROL ECU | *2 | BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY - BRAKE FLUID LEVEL WARNING SWITCH |
*3 | ECM | *4 | ENGINE ROOM RELAY BLOCK AND JUNCTION BLOCK ASSEMBLY - SEMICONDUCTOR PWR INTEGRATION ECU - ABS NO. 1 FUSE - ABS NO. 2 FUSE - ECU-IG1 NO. 5 FUSE |
ILLUSTRATION
*A | for Optitron Meter Type | *B | for TFT Meter Type |
*1 | BRAKE HOLD SWITCH | *2 | BRAKE PEDAL LOAD SENSING SWITCH |
*3 | STOP LIGHT SWITCH ASSEMBLY | *4 | VSC OFF SWITCH |
*5 | ELECTRIC PARKING BRAKE SWITCH ASSEMBLY | *6 | MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) |
*7 | INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY - ECU-DCC NO. 1 FUSE - A/BAG-IG2 FUSE - STOP FUSE | *8 | POWER STEERING ECU ASSEMBLY |
*9 | BRAKE PEDAL SUPPORT ASSEMBLY | *10 | COMBINATION METER ASSEMBLY - ABS WARNING LIGHT - BRAKE WARNING LIGHT - VSC OFF INDICATOR LIGHT - SLIP INDICATOR LIGHT - BRAKE HOLD STANDBY INDICATOR LIGHT - BRAKE HOLD OPERATED INDICATOR LIGHT - MULTI-INFORMATION DISPLAY (TRAC OFF MESSAGE) |
*11 | AIRBAG SENSOR ASSEMBLY - YAW RATE AND ACCELERATION SENSOR | *12 | YAW RATE AND ACCELERATION SENSOR |
*13 | STEERING ANGLE SENSOR | *14 | DLC3 |
*15 | COMBINATION SWITCH ASSEMBLY | - | - |
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Rear Combination Light Assembly (w/ Rear No. 2 Seat): Disassembly
DISASSEMBLY CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
PROCEDURE 1. REMOVE REAR COMBINATION LIGHT CAP (for LED Type Turn Signal Light) (a) for TMMC Made: (1) Remove the rear combination light cap. HINT: Use ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Knock Sensor: Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during knock control sensor removal/installation are shown below. Necessary Procedures After Parts Removed/Inst ...