Connect an iPod, USB memory device or portable audio player to the USB/ AUX port as indicated below. Select "iPod", "USB", "AUX" or "External" on the audio source selection screen and the device can be operated via Lexus Display Audio system.
Connecting using the USB/AUX port
1. Press the knob.
2. Open the cover.
■ iPod Open the cover and connect an iPod using an iPod cable.
Turn on the power of the iPod if it is not turned on.
■ USB memory Open the cover and connect the USB memory device.
Turn on the power, if applicable, of the USB memory device if it is not turned on.
■ Portable audio player Open the cover and connect the portable audio player.
Turn on the power of the portable audio player if it is not turned on.
Using a 4-pole AUX cable
To view a video on an iPod video or VTR, it is necessary to use a 4-pole AUX cable to connect the portable audio device.
When connecting a portable audio device to the AUX port, use a 4-pole AUX cable with a plug that matches the exact layout shown in the illustration.
When using an iPod video, a cable that has a 4-pole AUX plug and a USB connector is necessary. Connect the plug and connector to the AUX and USB ports.
■ When using a 4-pole AUX cable If a 4-pole AUX cable with a different layout is used, audio and/or video may not be output properly.
■ When using the USB/AUX port There is clearance between the lid and console box to allow the cable routed to outside the console box.
WARNING
■While driving Do not connect a device or operate the device controls.
NOTICE
■ To prevent damage to the device or its terminals Depending on the size and shape of the device that is connected to the system, the console box/auxiliary box may not close fully. In this case, do not forcibly close the console box/auxiliary box as this may damage the device or the terminal, etc.
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Vehicle Stability Control System: Yaw Rate Sensor Signal Bias Level Out of Range / Zero Adjustment Failure (C006328,C006396)
DESCRIPTION for Optitron Meter Type:
These DTCs are stored when the skid control ECU (brake actuator assembly) receives an internal malfunction signal from the yaw rate and acceleration sensor (airbag sensor assembly).
for TFT Meter Type:
These DTCs are stored when the skid control ECU (bra ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Power Tilt And Power Telescopic Steering Column System: Fail-safe Chart
FAIL-SAFE CHART HINT: If the power source voltage to the multiplex tilt and telescopic ECU returns to normal within 10 seconds during tilt or telescopic operation, the operation will be resumed. If it returns to normal after 10 seconds have elapsed, the operation restarts when a tilt or telescopic o ...