DESCRIPTION
The following DTCs are stored when a malfunction occurs in the skid control ECU (brake actuator assembly).
DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Memory | Note |
---|---|---|---|---|---|
C059704 | Brake System Control Module "A" System Internal Failure | Skid control ECU (brake actuator assembly) internal malfunction | Skid control ECU (brake actuator assembly) | DTC stored | An electric parking brake system malfunction is displayed on the multi-information display. |
C059746 | Brake System Control Module "A" Calibration / Parameter Memory Failure | Skid control ECU (brake actuator assembly) internal malfunction | Skid control ECU (brake actuator assembly) | DTC stored | An electric parking brake system malfunction is displayed on the multi-information display. |
C13CF1C | Left Electric Parking Brake Actuator Current Sensor Circuit Voltage Out of Range | Skid control ECU (brake actuator assembly) internal malfunction | Skid control ECU (brake actuator assembly) | DTC stored | An electric parking brake system malfunction is displayed on the multi-information display. |
C13D41C | Right Electric Parking Brake Actuator Current Sensor Circuit Voltage Out of Range | Skid control ECU (brake actuator assembly) internal malfunction | Skid control ECU (brake actuator assembly) | DTC stored | An electric parking brake system malfunction is displayed on the multi-information display. |
CAUTION / NOTICE / HINT
NOTICE:
Click here
PROCEDURE
1. | REPLACE SKID CONTROL ECU (BRAKE ACTUATOR ASSEMBLY) |
(a) Replace the skid control ECU (brake actuator assembly).
Click here
NEXT | END |
Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual > Camshaft: Installation
INSTALLATION PROCEDURE 1. SET NO. 1 CYLINDER TO TDC (COMPRESSION) (a) Confirm that the timing mark (cutout) on the crankshaft pulley is aligned with the "0" timing mark of the timing chain cover assembly. *a Timing Mark (Cutout) *b "0" Timing Mark 2. SET CAMSHAFT TIM ...
Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual > Front Camera: Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are replaced during forward recognition camera removal/installation are shown below. Necessary Procedure After Parts Removed/Installed/Replaced Re ...