PROBLEM SYMPTOMS TABLE
HINT:
Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
Rear Differential Symptom | Suspected Area | Link |
---|---|---|
Noise in rear differential | Oil level (Low or wrong grade) | |
Ring gear or drive pinion (Worn or chipped) | | |
Backlash adjustment (Defective) | | |
Preload adjustment (Defective) | | |
Tooth contact between ring gear and drive pinion (Defective) | | |
Bearing (Worn) | | |
Oil leak from rear differential | Oil level (Too high or wrong grade) | |
Diaphragm oil seal (Worn or damaged) | | |
Rear drive shaft oil seal (Worn or damaged) | | |
Seal packing (Damaged) | |
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Front Blower Motor: Removal
REMOVAL PROCEDURE 1. REMOVE FRONT DOOR SCUFF PLATE RH HINT: Use the same procedure as for the LH side. Click here 2. REMOVE COWL SIDE TRIM BOARD RH HINT: Use the same procedure as for the LH side. Click here 3. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Click here 4. REMOV ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Height Control Sensor: Installation
INSTALLATION PROCEDURE 1. INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY RH (a) Temporarily install the rear height control sensor sub-assembly RH with the 2 nuts. Torque: 5.0 N·m {51 kgf·cm, 44 in·lbf} (b) Engage the guide. (c) Connect the rear height control sensor sub-assembly ...