Lexus RX (RX 350L, RX450h) 2016-2024 Owners Manual: Other interior features

Sun visors

1. To set the visor in the forward position, flip it down.
2. To set the visor in the side position, flip down, unhook, and swing it to the side.
3. To use the side extender, place the visor in the side position, then slide it backward.

Vanity mirrors

Slide the cover to open.

The light turns on when the cover is opened.

If the vanity lights remain on when the power switch is turned off, the light will go off automatically after 20 minutes.

NOTICE To prevent 12-volt battery discharge, do not leave the vanity lights on for extended periods while the hybrid system is off.

Clock

Vehicles with a Lexus Display Audio system

The clock can be adjusted by pressing the buttons.

1. Pressing and holding will move the clock hands backward.
2. Pressing and holding will move the clock hands forward

Vehicles with a navigation system

The GPS clock's time is automatically adjusted by utilizing GPS time information.

For details, refer to "NAVIGATION SYSTEM OWNER'S MANUAL".

Wireless charger (if equipped)

A portable device, such as a smartphone or mobile battery, can be charged by just placing it on the charging area, provided the device is compatible with the Qi wireless charging standard created by the Wireless Power Consortium.

The wireless charger cannot be used with a portable device that is larger than the charging area. Additionally, depending on the portable device, the wireless charger may not operate properly. Refer to the operation manual of the portable device.

■ The "Qi" symbol The "Qi" symbol is a trademark of the Wireless Power Consortium.

■ Name for all parts

1. Power supply switch
2. Operation indicator light
3. Charge area

■ Using the wireless charger

1. Press the power supply switch of the wireless charger.

Pressing the switch again turns the wireless charger off.

When turned on, the operation indicator light (green) comes on.

When the power switch is turned off, the on/off state of the wireless charger will be memorized.

2. Place a portable device on the charging area with its charging surface facing down.

While charging, the operation indicator light (orange) will be illuminated.

If charging does not begin, move the portable device as close to the center of the charging area as possible.

When charging is complete, the operation indicator light (green) will illuminate.

• Recharging function
  • If a certain amount of time has elapsed since charging completed and the portable device has not been moved, the wireless charger will restart charging.
  • If the portable device is moved within the charging area, charging will stop temporarily then restart.

■ Operation indicator light status

*: Depending on the portable device, the operation indicator light may stay illuminated (orange) after charging has completed.

If the operation indicator light blinks

If an error is detected, the operation indicator light will blink (orange). Take the appropriate measures according to the table below.

■ The wireless charger can be operated when The power switch is in ACCESSORY or ON mode.

■ Portable devices that can be charged

• Portable devices compatible with the Qi wireless charging standard can be charged by the wireless charger. However, compatibility with all devices which meet the Qi wireless charging standard is not guaranteed.
• The wireless charger is designed to supply low power electricity (5 W or less) to a cellular phone, smartphone, or other portable device.

■ If a cover or accessory is attached to the portable device Do not charge a portable device if a cover or accessory which is not Qi compatible is attached. Depending on the type of cover and/or accessory attached, it may not be possible to charge the portable device. If the portable device is placed on the charging area and does not charge, remove the cover and/or accessories.

■ If interference is heard in AM radio broadcasts while charging Turn off the wireless charger and check if the noise is reduced. If noise is reduced, press and hold the power supply switch of the wireless charger for 2 seconds. The frequency of the wireless charger is changed and noise may be reduced. When the frequency is changed, the operation indicator light will blink (orange) 2 times.

■ Charging precautions

• If the electronic key cannot be detected in the cabin, charging cannot be performed.

  When a door is opened and closed, charging may be temporarily suspended.

• While charging, the wireless charger and the portable device will become warm. This is not a malfunction.

  If a portable device becomes warm while charging and charging stops due to the protection function of the portable device, wait until the portable device cools down and charge it again.

■ Sound generated during operation When the power supply switch is turned on or while a portable device is being identified, operation sounds may be heard. This is not a malfunction.

WARNING

■ Caution while driving When charging a portable device while driving, for safety reasons, the driver should not operate the portable device.

Failure to do so may result in the possibility of fire, equipment failure or damage, or burns due to heat.

• Do not put any metallic objects between the charging area and the portable device while charging.
• Do not attach metallic objects, such as aluminum stickers, to the charging area.
• Do not cover the wireless charger with a cloth or other object while charging.
• Do not attempt to charge portable devices which are not compatible with the Qi wireless charging standard.
• Do not disassemble, modify or remove the wireless charger.
• Do not apply force or impact to the wireless charger.

NOTICE

■ Conditions in which the wireless charger may not operate correctly In the following situations, the wireless charger may not operate correctly:

• When a portable device is fully charged
• When there is a foreign object between the charging area and portable device
• When a portable device becomes hot while charging
• When a portable device is placed on the wireless area with its charging surface facing up
• When a portable device is not centered on the charging area
• When the vehicle is near a TV tower, electric power plant, gas station, radio station, large display, airport or other facility that generates strong radio waves or electrical noise
• When the portable device is in contact with, or is covered by any of the following metallic objects:
  • Cards to which aluminum foil is attached
  • Cigarette boxes that have aluminum foil inside
  • Metallic wallets or bags
  • Coins
  • Metal hand warmers
  • Media such as CDs and DVDs
• When wireless keys (that emit radio waves) other than those of your vehicle are being used nearby.

If in situations other than above the wireless charger does not operate properly or the operation indicator light is blinking, the wireless charger may be malfunctioning. Contact your Lexus dealer.

■ To prevent failure or damage to data

• Do not bring magnetic cards, such as a credit card, or magnetic recording media, close to the wireless charger while charging. Otherwise, data may be erased due to the influence of magnetism.

  Additionally, do not bring precision instruments such as wrist watches, close to the wireless charger, as such objects may malfunction.

• Do not leave portable devices in the cabin. The temperature inside the cabin may become high when parked in the sun, and cause damage to the device.

■ To prevent 12-volt battery discharge Do not use the wireless charger for a long period of time with the hybrid system is stopped.

Power outlets

Please use as a power supply for electronic goods that use less than 12 VDC/10 A (power consumption of 120 W).

Observe the following when using electronic goods:

• Make sure that the power consumption of all the connected power outlets on the instrument panel and in the luggage compartment is less than 120 W.
• Make sure that the power consumption of all the connected power outlets inside the console box and on the rear console is less than 120 W.

On the instrument panel

Remove the cap.

Inside the console box

Open the lid.

On the rear console (if equipped)

Remove the cap.

In the luggage compartment (RX450h)

Open the lid.

In the luggage compartment (RX450hL)

Open the lid.

• The power outlets can be used when the power switch is in ACCESSORY or ON mode.
• The shape of the console box rim allows power cables to be passed through when the console box lid is closed.

NOTICE

• To avoid damaging the power outlets, install the cap or close the lid when the power outlets is not in use.

  Foreign objects or liquids that enter the power outlets may cause a short circuit.

• To prevent 12-volt battery discharge, do not use the power outlets longer than necessary when the hybrid system is off.

Front passenger footwell hooks

Use the front passenger footwell hooks to help support and prevent objects placed on the floor, such as a grocery bag, from overturning.

NOTICE To prevent the hooks from being damaged, do not hang anything from a hook or apply excessive force to it.

Rear door sunshades (if equipped)

Pull the sunshade up using the tab and hook the sunshade on to the anchors.

To lower the sunshade, pull it up slightly using the tab, unhook it from the anchors, and lower it slowly.

WARNING When a rear door sunshade is in use, do not put fingers, etc. on the anchors or in the groove of the rear door sunshade. Otherwise, a finger, etc. may get caught, possibly causing an injury.

NOTICE

• Do not put anything in an area where it may interfere with the operation of a rear door sunshade.
• To prevent damage to the rear door sunshades, do not apply excessive load or attach items to the rear door sunshades.

Armrest

RX450h

Fold down the armrest for use.

RX450hL

To adjust the armrest angle, raise the armrest to the highest position and then lower the armrest to the lowest position.

Raise the armrest again to the desired position and the armrest will be locked at that position.

When the armrest is locked, the armrest cannot be lowered.

To lower the armrest, raise the armrest to the highest position again.

NOTICE To prevent damage to the armrest, do not apply too much load on the armrest.

Assist grips

An assist grip installed on the ceiling can be used to support your body while sitting on the seat.

WARNING Do not use the assist grip when getting in or out of the vehicle or rising from your seat.

NOTICE To prevent damage to the assist grip, do not hang any heavy object or put a heavy load on the assist grip.

Coat hooks

The coat hooks are provided with the rear assist grips.

WARNING Do not hang coat hangers or other hard or sharp objects on the hook. If the SRS curtain shield airbags deploy, these items may become projectiles, causing death or serious injury.