DIAGNOSIS SYSTEM
DIAGNOSIS FUNCTION
(a) The diagnosis function turns off the cruise control indicator, illuminates the master warning light and displays a warning message when a malfunction is detected. When a malfunction is detected in the dynamic radar cruise control system, DTCs are stored in the ECM or forward recognition camera.
*a | Cruise Control Indicator (Constant Speed Control Mode) |
*b | Cruise Control Indicator (Vehicle-to-vehicle Distance Control Mode) |
*c | Master Warning Light |
NOTICE:
As data stored in the ECU will be cleared, do not remove any fuses or disconnect the cable from the negative (-) battery terminal before the inspection is complete.
HINT:
When the system returns to normal, the warning message "Cruise Control Malfunction Visit Your Dealer" displayed on the multi-information display will be cleared.
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Front Door Belt Moulding: Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during front door belt moulding removal/installation are shown below. Necessary Procedures After Parts Removed/ ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Rear Axle Hub: On-vehicle Inspection
ON-VEHICLE INSPECTION CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
PROCEDURE 1. REMOVE REAR WHEEL Click here 2. SEPARATE REAR DISC BRAKE CALIPER ASSEMBLY Click here 3. REMOVE REAR DISC Click here 4. INSPEC ...