INSTALLATION
PROCEDURE
1. INSTALL GENERATOR ASSEMBLY
(a) Install the wire harness clamp bracket with the bolt.
Torque:
8.4 N·m {86 kgf·cm, 74 in·lbf}
(b) Type A:
(1) Install the generator assembly with the 2 bolts.
Torque:
43 N·m {438 kgf·cm, 32 ft·lbf}
(2) Temporarily install the generator assembly bracket with the 2 bolts.
(3) Fully tighten the 2 bolts.
Torque:
20 N·m {204 kgf·cm, 15 ft·lbf}
(c) Type B:
(1) Install the generator assembly bracket to the generator assembly with the bolt.
Torque:
20 N·m {204 kgf·cm, 15 ft·lbf}
(2) Install the generator assembly with the 2 bolts.
Torque:
43 N·m {438 kgf·cm, 32 ft·lbf}
(3) Install the nut.
Torque:
20 N·m {204 kgf·cm, 15 ft·lbf}
(d) Engage the 2 wire harness clamps.
(e) Connect the compressor and magnetic clutch connector.
(f) Connect the generator assembly connector.
(g) Connect the wire harness to terminal B with the nut.
Torque:
9.8 N·m {100 kgf·cm, 87 in·lbf}
(h) Close the terminal cap.
2. INSTALL V-RIBBED BELT
Click here
3. INSTALL RADIATOR ASSEMBLY
Click here
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
Click here
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Cooling Fan System: Problem Symptoms Table
PROBLEM SYMPTOMS TABLE HINT:
Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspect ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Yaw Rate And Acceleration Sensor: Components
COMPONENTS ILLUSTRATION *1 FRONT NO. 2 CONSOLE BOX INSERT - - ILLUSTRATION *1 YAW RATE SENSOR ASSEMBLY *2 CONNECTOR N*m (kgf*cm, ft.*lbf): Specified torque - - ...