FAIL-SAFE CHART
MALFUNCTION DETECTION
(a) Operation when malfunction is detected
Content | Operation | |
---|---|---|
Heater failure | Overcurrent detection of drive element | Heater output off |
Overheating detection of drive element | Heater output off | |
Power failure | Low-voltage detection | Heater output off |
Over-voltage detection | Heater output off | |
Heater OFF timer | 30 minutes after heated steering wheel system is turned on | Heater output off |
(b) Malfunction detection conditions
(1) When an open or short in the steering wheel heater unit thermistor continues for 2 seconds or more.
(2) When the steering heater switch is pressed continuously for 10 seconds or more.
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Can Communication System: Main Body ECU Communication Stop Mode
DESCRIPTION Detection Item Symptom Trouble Area Main Body ECU Communication Stop Mode Either condition is met:
"Main Body" is not displayed on the CAN Bus Check screen of the Techstream.
Click here
Communication system DTCs (DTCs that start with U) that correspond to "Main Bod ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Automatic Transaxle System: Brake Switch "B" Circuit Short to Battery (P070312)
DESCRIPTION The purpose of the stop light switch signal circuit is to prevent the engine from stalling when the brakes are suddenly applied while driving in the lock-up condition. When the brake pedal is depressed, the stop light switch assembly sends a signal to the ECM. The ECM then cancels the op ...