DESCRIPTION
These DTCs are stored when a malfunction occurs in the multi-display assembly.
DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
---|---|---|---|
B15A6 | Display Malfunction | When any of the following conditions is met:
| Multi-display assembly |
B15B0 | Display Screen Malfunction | Picture circuit (TFT unit) malfunction | Multi-display assembly |
PROCEDURE
1. | CHECK DTC |
(a) Clear the DTCs.
Body Electrical > Navigation System > Clear DTCs(b) Recheck for DTCs and check that no DTCs are output.
Body Electrical > Navigation System > Trouble CodesOK:
No DTCs are output.
OK | USE SIMULATION METHOD TO CHECK |
NG | REPLACE MULTI-DISPLAY ASSEMBLY |
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Smart Access System With Push-button Start (for Start Function): Power Source Mode does not Change to ON (ACC)
DESCRIPTION If the engine switch is pressed with the electrical key transmitter sub-assembly in the cabin, the certification ECU (smart key ECU assembly) receives a signal and changes the power source mode. Related Data List and Active Test Items Problem Symptom Data List and Active Test Po ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Power Back Door Control Switch: Inspection
INSPECTION PROCEDURE 1. INSPECT POWER BACK DOOR SWITCH (INTEGRATION CONTROL AND PANEL ASSEMBLY) (a) Check the operation of the power back door switch (integration control and panel assembly). (1) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester ...