DESCRIPTION
DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Memory |
---|---|---|---|---|
U0100 | Lost Communication with ECM | No communication with ECM |
| Memorized |
U0131 | Lost Communication with Electric Power Steering ECU | No communication with power steering ECU assembly |
| Memorized |
U0142 | Lost Communication with Main Body ECU | No communication with main body ECU (multiplex network body ECU) |
| Memorized |
U0151 | Lost Communication with Restraints Control Module | No communication with airbag sensor assembly |
| Memorized |
U0155 | Lost Communication with Combination Meter | No communication with combination meter assembly |
| Memorized |
U0163 | Lost Communication with Navigation Control Module | No communication with radio receiver assembly (A/C control panel) |
| Memorized |
PROCEDURE
1. | GO TO CAN COMMUNICATION SYSTEM |
HINT:
Refer to CAN Communication System.
Click here
NEXT | END |
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Rear Door Belt Moulding: Installation
INSTALLATION CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
PROCEDURE 1. INSTALL REAR DOOR BELT MOULDING ASSEMBLY (a) Engage the 8 claws as shown in the illustration to install the rear door belt moulding assembly ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Automatic Transaxle System: Intermediate Shaft Speed Sensor "A" Circuit Short to Battery (P079112,P079114,P079131)
DESCRIPTION The transmission revolution sensor (NC) detects the rotation speed of the counter gear which shows the output shaft speed of automatic transaxle assembly. Based on the transmission revolution sensor (NC) signal and the transmission revolution sensor (NT and NC3) signals, the ECM controls ...