Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual: Reassembly

Inspection

INSPECTION PROCEDURE 1. INSPECT MAP LIGHT ASSEMBLY (a) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Condition Specified Condition ...

Installation

INSTALLATION PROCEDURE 1. INSTALL MAP LIGHT ASSEMBLY (a) Connect each connector. (b) Engage the 2 guides and 4 clips to install the map light assembly. ...

Other materials:

Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Brake Actuator: On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE 1. CONNECT TECHSTREAM (a) Connect the Techstream to the DLC3 with the engine switch off. (b) Start the engine and run it at idle. (c) Turn the Techstream on. (d) Enter the following menus: Chassis / Brake/EPB / Active Test. HINT: Refer to the Techstream operator's man ...

Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Audio And Visual System (for 12.3 Inch Display): Start Up Signal Circuit between Radio Receiver Assembly and Navigation ECU
DESCRIPTION This circuit includes the navigation ECU and radio receiver assembly. WIRING DIAGRAM PROCEDURE 1. CHECK HARNESS AND CONNECTOR (RADIO RECEIVER ASSEMBLY - NAVIGATION ECU) (a) Disconnect the J149 radio receiver assembly connector. (b) Disconnect the J153 navigation ECU connector. ...