CAUTION / NOTICE / HINT
HINT:
Use the following procedure to troubleshoot the wireless charging system.
PROCEDURE
1. | VEHICLE BROUGHT TO WORKSHOP |
|
2. | CUSTOMER PROBLEM ANALYSIS CHECK AND SYMPTOM CHECK |
What | Vehicle model, system name |
What | Date, time, occurrence frequency |
What | Road conditions |
Under what conditions? | Driving conditions, weather conditions |
How did it happen? | Problem symptoms |
|
3. | INSPECT BATTERY VOLTAGE |
(a) Measure the battery voltage.
Standard Voltage:
11 to 14 V
If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.
|
4. | PROBLEM SYMPTOMS TABLE |
(a) Refer to Problem Symptoms Table.
Click here
Result | Proceed to |
---|---|
Fault is not listed in Problem Symptoms Table. | A |
Fault is listed in Problem Symptoms Table. | B |
B | GO TO STEP 6 |
|
5. | OVERALL ANALYSIS AND TROUBLESHOOTING |
(a) Refer to Operation Check.
Click here
(b) Refer to Terminals of ECU.
Click here
|
6. | REPAIR OR REPLACE |
|
7. | CONFIRMATION TEST |
NEXT | END |
Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual > Sliding Roof Housing (for Slidng Roof): Disassembly
DISASSEMBLY PROCEDURE 1. REMOVE SLIDING ROOF DRIVE GEAR SUB-ASSEMBLY (a) Remove the bolt. Remove in this Direction (b) Disengage the 2 guides as shown in the illustration to remove the map light bracket. (c) Remove the 2 bolts and sliding roof drive gear sub-assembly. 2. REM ...
Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual > Sliding Roof System: Switch Failure (B2342)
DESCRIPTION This DTC is stored when the sliding roof ECU (sliding roof drive gear sub-assembly) detects that the sliding roof switch (map light assembly) is stuck for 30 seconds or more. DTC No. Detection Item DTC Detection Condition Trouble Area B2342 Switch Failure Sliding roof EC ...