CUSTOMIZE PARAMETERS
CUSTOMIZE FRONT POWER SEAT CONTROL SYSTEM (w/ Memory)
HINT:
The following items can be customized.
NOTICE:
(a) Customizing with the Techstream
(1) Connect the Techstream to the DLC3.
(2) Turn the engine switch on (IG).
(3) Turn the Techstream on.
(4) Enter the following menus: Customize Setting / Smart Key or Seat / Access or Seat.
(5) Select the setting by referring to the table below.
Smart Key / Access Tester Display | Description | Default | Setting | ECU |
---|---|---|---|---|
Seat position/Tilt & Telesco memory recall setting | This customize function switches the condition of the seat position and Tilt & Telesco memory recall. Possible recall activation parameter "D-door unlock and open by smart system" or "Any door unlock and open with smart system". | D Door | 0:D Door,1:Any Door | Main body ECU (Multiplex network body ECU) |
Tester Display | Description | Default | Setting | ECU |
---|---|---|---|---|
Seat Move Distance | Allows customizing of the seat movement distance for the power easy access system. | Standard | 00:OFF,01:Little,10:Standard | Main body ECU (Multiplex network body ECU) |
(b) Customizing with the multi-display
(1) Turn the engine switch on (IG).
(2) Enter the following menus: MENU / Setup / Vehicle / Vehicle settings / Vehicle Customization / Other Vehicle Settings.
(3) Select the setting by referring to the table below.
Display | Description | Default | Setting | Relevant ECU |
---|---|---|---|---|
Driver's Seat Easy Exit | Allows customizing of the seat movement distance for the power easy access system. | Full | Off / Partial / Full | Main body ECU (Multiplex network body ECU) |
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Power Door Lock Control System: Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART Power Door Lock Control System DTC No. Detection Item INF Code DTC Detection Condition Trouble Area MIL Warning Indicate Memory DTC Output from Test Mode / Check Mode Return-to-normal Condition Fail-safe Operation Note Link B1243 GSW T ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Generator (for 150 A Type): Disassembly
DISASSEMBLY PROCEDURE 1. REMOVE GENERATOR PULLEY CAP (a) Using a screwdriver, remove the generator pulley cap from the generator pulley with clutch. NOTICE: Do not reuse the generator pulley cap. 2. REMOVE GENERATOR PULLEY WITH CLUTCH (a) Secure the generator assembly in a vise betwee ...