SYSTEM DESCRIPTION
REAR POWER SEAT CONTROL SYSTEM DESCRIPTION
FUNCTION OF MAIN COMPONENTS
Component | Function |
---|---|
| Uses power supplied from the fold seat control ECU (LH/RH seat) to operate and fold or return the rear No. 2 seatback. Uses a built in Hall IC to detect the position of the rear No. 2 seatback. |
| Uses power supplied from the fold seat control ECU (LH/RH seat) to operate and fold or return the rear No. 2 seat cushion. Uses a built in Hall IC to detect the position of the rear No. 2 seat cushion. |
| Outputs rear No. 2 seat fold and return operation signals to the fold seat control ECU (LH/RH seat) to perform a fold or return operation of the rear No. 2 power seat. |
Fold Seat Control ECU (LH/RH seat) | Receives signals from each seat switch and operates the reclining motor and lifter motor to fold and return the rear No. 2 power seat. Sounds a buzzer if conditions for the requested operation are not met or a jam is detected. |
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Cylinder Head: Replacement
REPLACEMENT CAUTION / NOTICE / HINT HINT:
Use the same procedure for bank 1 and bank 2.
The following procedure is for bank 2.
PROCEDURE 1. REPLACE INTAKE VALVE GUIDE BUSH (a) Heat the cylinder head LH to between 80 and 100°C (176 and 212°F). (b) Place the cylinder head LH on wooden blocks ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Heated Steering Wheel System: Terminals Of Ecu
TERMINALS OF ECU STEERING WHEEL HEATER CONTROL ASSEMBLY HINT: Perform the inspection from the harness side with the connectors connected. (a) Measure the voltage or resistance according to the value(s) in the table below. Terminal No. (Symbol) Terminal Description Condition Specified Condi ...