INSTALLATION
PROCEDURE
1. INSTALL REAR SEAT 3 POINT TYPE BELT ASSEMBLY RH
(a) Install the rear seat 3 point type belt assembly RH with the bolt.
Torque:
42 N·m {428 kgf·cm, 31 ft·lbf}
(b) Engage the 2 clamps.
(c) Connect the connector.
2. INSTALL REAR NO. 1 SEAT RECLINING ADJUSTER INSIDE COVER
Click here
3. INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER WITH PAD
Click here
4. INSTALL REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY RH
Click here
5. INSTALL NO. 1 RECLINING ADJUSTER RELEASE HANDLE RH
Click here
6. INSTALL REAR SEAT COVER CAP RH
Click here
7. INSTALL REAR NO. 1 SEAT ASSEMBLY RH
Click here
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Can Communication System: Check Bus 1 Line for Short to +B
DESCRIPTION There may be a short circuit between one of the CAN bus lines and +B when there is no resistance between terminal 23 (CA1H) of the network gateway ECU and terminal 16 (BAT) of the DLC3, or terminal 8 (CA1L) of the network gateway ECU and terminal 16 (BAT) of the DLC3. Symptom Troubl ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Can Communication System: Center Airbag Sensor Communication Stop Mode
DESCRIPTION Detection Item Symptom Trouble Area Center Airbag Sensor Communication Stop Mode Either condition is met:
"Airbag" is not displayed on the CAN Bus Check screen of the Techstream.
Click here
Communication system DTCs (DTCs that start with U) that correspond to "Center ...