DESCRIPTION
The airbag sensor assembly sends/receives signals to/from each ECU via CAN communication.
DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Warning Indicate | Test Mode / Check Mode |
---|---|---|---|---|---|
U0154 | Lost Communication with Restraints Occupant Classification System Module | CAN communication error between the airbag sensor assembly and occupant detection ECU (CAN communication system malfunction) | CAN communication system | Comes on | Does not apply to test/check mode |
CAUTION / NOTICE / HINT
Refer to troubleshooting in CAN Communication System.
Click here
PROCEDURE
1. | GO TO CAN COMMUNICATION SYSTEM |
(a) Go to CAN communication system.
Click here
NEXT | END |
Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual > Lexus Enform System: DCM Data Signal Circuit between Navigation ECU and DCM
DESCRIPTION This circuit is used to send and receive signals between the DCM (Telematics Transceiver), radio receiver assembly and navigation ECU. WIRING DIAGRAM PROCEDURE 1. CHECK HARNESS AND CONNECTOR (RADIO RECEIVER ASSEMBLY - DCM (TELEMATICS TRANSCEIVER)) (a) Disconnect the J157 DCM (T ...
Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual > Intake System: System Diagram
SYSTEM DIAGRAM *1 Throttle Body with Motor Assembly *2 Intake Air Control Valve (for ACIS) *3 Intake Air Control Valve Actuator (for ACIS) *4 ECM *5 Vacuum Switching Valve (for ACIS) - - *a Engine Speed Signal *b from Vacuum Tank ...