INSTALLATION
CAUTION / NOTICE / HINT
HINT:
PROCEDURE
1. INSTALL NO. 3 REAR DOOR WEATHERSTRIP
(a) Engage the 7 clips to install the No. 3 rear door weatherstrip.
2. INSTALL REAR DOOR LOWER OUTSIDE MOULDING SUB-ASSEMBLY
(a) Engage the 5 clips as shown in the illustration.
Install in this Direction |
(b) Install the rear door lower outside moulding sub-assembly with the screw as shown in the illustration.
Install in this Direction |
3. INSTALL REAR DOOR OUTSIDE MOULDING SUB-ASSEMBLY
(a) Engage the 6 clips. | |
(b) Install the nut.
(c) Install the hole plug.
(d) Engage the 5 claws as shown in the illustration to install the rear door outside moulding sub-assembly.
Install in this Direction |
(e) Engage the clip.
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Front Seat Outer Belt Assembly: Inspection
INSPECTION PROCEDURE 1. INSPECT FRONT SEAT OUTER BELT ASSEMBLY (a) Check the seat belt tension reducer operation. CAUTION: Do not apply battery voltage to the pretensioner connector. (1) Connect a positive (+) lead from the battery to terminal 1 of the seat belt tension reducer connector and a ne ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Sfi System: Throttle/Pedal Position Sensor "A" Minimum Stop Performance (P210900)
DESCRIPTION The idle speed is controlled by the Electronic Throttle Control System (ETCS). The ETCS is comprised of a throttle actuator, which operates the throttle valve, and a throttle position sensor, which detects the opening amount of the throttle valve. The ECM controls the throttle actuator t ...