INSPECTION
PROCEDURE
1. INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY
(a) Inspect the No. 1 interior illumination light. (1) Apply battery voltage to each terminal of No. 1 interior illumination light connector and check the operation of the No. 1 interior illumination light. Result:
If the result is not as specified, replace the No. 1 interior illumination light assembly. |
|
Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual > Rear No. 1 Seat Inner Belt Assembly(for 60/40 Split Seat Type Rh Side): Installation
INSTALLATION PROCEDURE 1. INSTALL REAR SEAT 3 POINT TYPE BELT ASSEMBLY RH (a) Install the rear seat 3 point type belt assembly RH with the bolt. Torque: 42 N·m {428 kgf·cm, 31 ft·lbf} (b) Engage the 2 clamps. (c) Connect the connector. 2. INSTALL REAR NO. 1 SEAT RECLINING ADJUSTER INSIDE COVER C ...
Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual > Sfi System: Internal Control Module Monitoring Processor Performance Watchdog/Safety MCU Failure (P060A47)
MONITOR DESCRIPTION The main CPU and sub CPU of the ECM perform data communication between each other. The main CPU monitors the communications and WDC pulses from the sub CPU. When the signal malfunctions below are detected, this DTC is stored. DTC No. Detection Item DTC Detection Condition ...